|
|
|
|
Joined: Apr 2006
Posts: 24
Member
|
|
Member
Joined: Apr 2006
Posts: 24 |
Hey all, I recently purchased an old Boring Machine on ebay, ( I believe it's a Snell) and I did a fairly thorough restoration of it. I thought some of you might be interested in the process. Here is the link: http://picasaweb.google.com/colton.allen/RestorationProject#Colton
|
|
|
|
|
Joined: Mar 2002
Posts: 1,696
Member
|
|
Member
Joined: Mar 2002
Posts: 1,696 |
Whatever you do, have fun doing it!
|
|
|
|
|
Joined: Apr 1999
Posts: 245
Member
|
|
Member
Joined: Apr 1999
Posts: 245 |
Very Cool, Colton. Could you describe the rust removal process details, please.
Not all who wander are lost.
|
|
|
|
|
Joined: Mar 2002
Posts: 344
Member
|
|
Member
Joined: Mar 2002
Posts: 344 |
Old Pal David Crocco taught many of us how to use a fish tank, some water, baking soda and a 12v battery charger to remove rust from timber framing tools. Anyone out there care to describe this process? http://www.wag-society.org/Electrolysis/rust_redct_elect_setup.php
|
|
|
|
|
Joined: Mar 2008
Posts: 570
Member
|
|
Member
Joined: Mar 2008
Posts: 570 |
Another set of directions, has pictures and question & answers:
http://users.eastlink.ca/~pspencer/nsaeta/electrolysis.html#setup
Don Perkins
Member, TFG
to know the trees...
|
|
|
|
|
Joined: Mar 2002
Posts: 1,696
Member
|
|
Member
Joined: Mar 2002
Posts: 1,696 |
This is the method my friend uses to clean tools.
Whatever you do, have fun doing it!
|
|
|
|
|
Joined: Dec 2007
Posts: 1,882
Member
|
|
Member
Joined: Dec 2007
Posts: 1,882 |
Patina..... it takes year to accumulate, then it's gone in moments.
Tim
|
|
|
|
|
Joined: Apr 2006
Posts: 24
Member
|
|
Member
Joined: Apr 2006
Posts: 24 |
The great thing about using electrolysis to remove rust is that it doesn't remove the patina. i believe the way it works is..
Rust is Iron Oxide. Electrolysis separates the Oxide from the Iron. it will not harm any good metal in any way.
There are many good write-ups on the internet about how to do it. just do a search for Rust Removal using Electrolysis.
For safety reasons i will says this.
Do not use Stainless Steel Anodes. There is Chromium in stainless steel which will create Chromates in the solution and this will be very poisonous.
Do not us anything for the solution other than Sodium BiCarbonate(baking Soda) or Sodium Carbonite (Washing Soda)
I couldn't find Washing Soda but OxyClean is almost the same thing and work great.
I have read about other people using other stuff but upon research found that it was unsafe.Using Sodium Chloride (Table Salt)creates chlorine gas which is unsafe.
Do not do this indoors. This process creates hydrogen gas, which is harmless unless it condenses and ignites.
Remember the Hindenburg?
|
|
|
|
|
Joined: Apr 2006
Posts: 24
Member
|
|
Member
Joined: Apr 2006
Posts: 24 |
Old Pal David Crocco taught many of us how to use a fish tank, some water, baking soda and a 12v battery charger to remove rust from timber framing tools. Anyone out there care to describe this process? http://www.wag-society.org/Electrolysis/rust_redct_elect_setup.php[color:#000000]This link recommends using stainless steel for anodes which is very unsafe. Colton[/color]
|
|
|
|
|
Joined: Feb 2006
Posts: 718
Member
|
|
Member
Joined: Feb 2006
Posts: 718 |
That's a Swan Premium machine. The regular Swans didn't pivot. Mine in pieces. I had to make a new base, it rocked like a rocking horse.  Finished. 
Member, Timber Framers Guild
|
|
|
|
|
|
|
