Register Log In

Timber Framers Guild Forums Tools Tool Forum tapping out chisel edges

Print Thread

Rate Thread

Re: tapping out chisel edges Jesse Frank #11905 06/19/07 02:41 PM
Joined: Nov 2003 Posts: 1,124 Keene,Ontario, Canada M Mark Davidson Member
Mark Davidson Member M Joined: Nov 2003 Posts: 1,124 Keene,Ontario, Canada	Brad -180 grit sounds too fine to me, I often use 40 and 60 to take down a bad back.

Entire Thread
Subject	Posted By	Posted
tapping out chisel edges	Mark Davidson	05/17/07 05:28 PM
Re: tapping out chisel edges	kfhines	05/18/07 10:54 AM
Re: tapping out chisel edges	Mark Davidson	05/18/07 12:28 PM
Re: tapping out chisel edges	kfhines	05/18/07 01:49 PM
Re: tapping out chisel edges	brad_bb	06/17/07 04:47 AM
Re: tapping out chisel edges	Dan F	06/17/07 11:28 AM
Re: tapping out chisel edges	Mark Davidson	06/17/07 02:24 PM
Re: tapping out chisel edges	brad_bb	06/17/07 03:43 PM
Re: tapping out chisel edges	Jesse Frank	06/18/07 01:55 AM
Re: tapping out chisel edges	Dave Shepard	06/18/07 03:44 AM
Re: tapping out chisel edges	brad_bb	06/18/07 09:34 PM
Re: tapping out chisel edges	Jesse Frank	06/19/07 02:36 PM
Re: tapping out chisel edges	Mark Davidson	06/19/07 02:41 PM
Re: tapping out chisel edges	brad_bb	06/19/07 03:13 PM
Re: tapping out chisel edges	Lignator	06/18/07 10:26 PM
Re: tapping out chisel edges	Mark Davidson	06/18/07 10:43 PM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)

Responsive Width:

PHP: 8.3.33 Page Time: 0.056s Queries: 18 (0.036s) Memory: 3.0120 MB (Peak: 3.5639 MB) Data Comp: Off Server Time: 2026-09-16 15:56:15 UTC
Valid HTML 5 and Valid CSS