Register Log In

Timber Framers Guild Forums Tools Timber Engineering timbers

Print Thread

Rate Thread

Re: timbers brad_bb #12613 08/22/07 11:44 PM
Joined: Dec 2005 Posts: 574 Golden, B.C. T Timber Goddess Member
Timber Goddess Member T Joined: Dec 2005 Posts: 574 Golden, B.C.	We've done relief cuts on some projects, but it seems everyone has a different opinion on exactly how deep they should go... What's the opinion here? (POP goes the can o' worms again.... )

Entire Thread
Subject	Posted By	Posted
timbers	michael salbego	08/14/07 01:14 AM
Re: timbers	Mark Davidson	08/14/07 02:24 AM
Re: timbers	Timber Goddess	08/14/07 04:11 AM
Re: timbers	michael salbego	08/15/07 04:08 AM
Re: timbers	mo	08/15/07 06:34 AM
Re: timbers	Mark Davidson	08/16/07 01:39 AM
Re: timbers	timber brained	08/20/07 12:32 AM
Re: timbers	brad_bb	08/20/07 02:43 PM
Re: timbers	Timber Goddess	08/22/07 11:44 PM
Re: timbers	Mark Davidson	08/23/07 03:19 PM
Re: timbers	Don P	08/24/07 03:15 AM
Re: timbers	Timber Goddess	08/26/07 08:21 PM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)

Responsive Width:

PHP: 8.3.33 Page Time: 0.065s Queries: 17 (0.048s) Memory: 3.0033 MB (Peak: 3.5632 MB) Data Comp: Off Server Time: 2026-09-16 22:54:45 UTC
Valid HTML 5 and Valid CSS