Register Log In

Timber Framers Guild Forums General General Forum Questions set back mortises

Print Thread

Rate Thread

Re: set back mortises mo #16026 06/26/08 01:07 AM
Joined: Nov 2003 Posts: 1,124 Keene,Ontario, Canada M Mark Davidson Member
Mark Davidson Member M Joined: Nov 2003 Posts: 1,124 Keene,Ontario, Canada	I use this if the tenon/mortise are taking away too much wood, as in the rafter tenon below

Entire Thread
Subject	Posted By	Posted
set back mortises	mo	06/25/08 11:07 PM
Re: set back mortises	mo	06/26/08 12:23 AM
Re: set back mortises	Mark Davidson	06/26/08 01:07 AM
Re: set back mortises	TIMBEAL	06/26/08 01:12 AM
Re: set back mortises	TIMBEAL	06/26/08 01:17 AM
Re: set back mortises	Gabel	06/26/08 03:20 AM
Re: set back mortises	Gabel	06/26/08 03:25 AM
Re: set back mortises	daiku	06/26/08 01:08 PM
Re: set back mortises	Ken Hume	06/26/08 09:24 PM
Re: set back mortises	Mark Davidson	06/27/08 01:07 AM
Re: set back mortises	Jim Rogers	06/27/08 07:47 PM
Re: set back mortises	OurBarns1	06/27/08 08:39 PM
Re: set back mortises	bloveland	10/14/08 01:02 AM
Re: set back mortises	fordh	07/30/08 04:02 AM
Re: set back mortises	mo	07/30/08 10:07 PM
Re: set back mortises	mo	08/01/08 03:26 AM
Re: set back mortises	Mark Davidson	08/02/08 06:17 PM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)

Responsive Width:

PHP: 8.3.33 Page Time: 0.089s Queries: 18 (0.067s) Memory: 3.0151 MB (Peak: 3.5642 MB) Data Comp: Off Server Time: 2026-09-16 15:56:44 UTC
Valid HTML 5 and Valid CSS