Register Log In

Timber Framers Guild Forums General General Forum Questions degrees/angles

Print Thread

Rate Thread

Re: degrees/angles Joe Bartok #16081 06/30/08 06:49 PM
Joined: Apr 2006 Posts: 125 Ontario, Canada Joe Bartok Member
Joe Bartok Member Joined: Apr 2006 Posts: 125 Ontario, Canada	Oops! There's a typo in the link in the last post. Here it is again: Rise Run.pdf Hip-Valley Roof Framing and Joinery Math

Entire Thread
Subject	Posted By	Posted
degrees/angles	TIMBEAL	06/30/08 09:15 AM
Re: degrees/angles	Joe Bartok	06/30/08 12:30 PM
Re: degrees/angles	Joe Bartok	06/30/08 12:33 PM
Re: degrees/angles	Joe Bartok	06/30/08 02:48 PM
Re: degrees/angles	Joe Bartok	06/30/08 06:49 PM
Re: degrees/angles	Mark Davidson	06/30/08 08:04 PM
Re: degrees/angles	Mark Davidson	06/30/08 08:07 PM
Re: degrees/angles	Joel McCarty	06/30/08 08:59 PM
Re: degrees/angles	Roger Nair	06/30/08 09:12 PM
Re: degrees/angles	Joe Bartok	06/30/08 09:52 PM
Re: degrees/angles	TIMBEAL	07/01/08 12:32 AM
Re: degrees/angles	Waccabuc	07/01/08 10:08 PM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)

Responsive Width:

PHP: 8.3.33 Page Time: 0.053s Queries: 18 (0.034s) Memory: 3.0028 MB (Peak: 3.5632 MB) Data Comp: Off Server Time: 2026-09-16 15:04:22 UTC
Valid HTML 5 and Valid CSS