Register Log In

Timber Framers Guild Forums Tools Timber Engineering Engineering Check

Print Thread

Rate Thread

Re: Engineering Check Timber Troll #17407 11/25/08 12:07 AM
Joined: Mar 2002 Posts: 1,696 Sneads Ferry, NC, USA J Jim Rogers Member
Jim Rogers Member J Joined: Mar 2002 Posts: 1,696 Sneads Ferry, NC, USA	I believe the spreadsheet software I got from Heartwood school does check it twice. Once for bending and once for shear.... As well as a third time for deflection... Whatever you do, have fun doing it!

Entire Thread
Subject	Posted By	Posted
Engineering Check	Timber Troll	11/24/08 06:36 AM
Re: Engineering Check	Timber Troll	11/24/08 06:42 AM
Re: Engineering Check	Timber Troll	11/24/08 03:23 PM
Re: Engineering Check	Jim Rogers	11/25/08 12:07 AM
Re: Engineering Check	Roger Nair	11/25/08 12:34 AM
Re: Engineering Check	Timber Troll	11/25/08 01:28 AM
Re: Engineering Check	Don P	11/25/08 02:37 AM
Re: Engineering Check	Ken Hume	11/25/08 07:52 AM
Re: Engineering Check	Don P	11/26/08 12:06 AM
Re: Engineering Check	Don P	01/04/09 03:26 AM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)

Responsive Width:

PHP: 8.3.33 Page Time: 0.098s Queries: 18 (0.040s) Memory: 3.0011 MB (Peak: 3.5669 MB) Data Comp: Off Server Time: 2026-09-16 12:55:14 UTC
Valid HTML 5 and Valid CSS