Saw for kerfing joints - Timber Frame Forums

Register Log In Timber Framers Guild Forums Tool Forum Saw for kerfing joints

Print Thread

Rate Thread

Re: Saw for kerfing joints [Re: Tom Cundiff] #19188 04/14/09 09:36 PM
Joined: Nov 2003 Posts: 1,124 Keene,Ontario, Canada M Mark Davidson Member
Mark Davidson Member M Joined: Nov 2003 Posts: 1,124 Keene,Ontario, Canada	I do what daiku says, lay out the correction then pull apart and cut.

Entire Thread
Subject	Posted By	Posted
Saw for kerfing joints	Bigshow	04/14/09 12:55 PM
Re: Saw for kerfing joints	bmike	04/14/09 01:18 PM
Re: Saw for kerfing joints	Bigshow	04/14/09 01:52 PM
Re: Saw for kerfing joints	bmike	04/14/09 02:07 PM
Re: Saw for kerfing joints	daiku	04/14/09 06:09 PM
Re: Saw for kerfing joints	Bigshow	04/14/09 06:30 PM
Re: Saw for kerfing joints	Bigshow	04/14/09 08:26 PM
Re: Saw for kerfing joints	Tom Cundiff	04/14/09 08:43 PM
Re: Saw for kerfing joints	Mark Davidson	04/14/09 09:36 PM
Re: Saw for kerfing joints	Tom Cundiff	04/14/09 09:58 PM
Re: Saw for kerfing joints	Ken Hume	04/15/09 07:27 AM
Re: Saw for kerfing joints	TIMBEAL	04/15/09 10:33 AM
Re: Saw for kerfing joints	Tom Cundiff	04/15/09 02:25 PM

Moderated by Jim Rogers, mdfinc

Hop To

Newest Members

CharlieM, Bradyhas1, cpgoody, James_Fargeaux, HFT
5138 Registered Users

show/hide columns on this page

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)

PHP: 5.4.45 Page Time: 0.074s Queries: 17 (0.049s) Memory: 3.1802 MB (Peak: 3.3998 MB) Data Comp: Off Server Time: 2024-06-01 10:01:30 UTC
Valid HTML 5 and Valid CSS