Register Log In

Timber Framers Guild Forums General General Forum Questions Removing sap from Doug Fir Timbers

Print Thread

Rate Thread

Re: Removing sap from Doug Fir Timbers #1992 10/05/05 03:29 PM
Joined: Dec 1999 Posts: 171 Greenfield, Massachusetts C Chris Hall Member
Chris Hall Member C Joined: Dec 1999 Posts: 171 Greenfield, Massachusetts	Lamello makes a repair tool somewhat like their biscuit jointer which would deal well with pitch pockets: www.lamello.com/english/f_start_e2.htm They have patches up to 20x65mm, which would handle most situations I would think. Chris My blog on carpentry practice, East and West: https://thecarpentryway.blog

Entire Thread
Subject	Posted By	Posted
Removing sap from Doug Fir Timbers	daiku	09/26/05 04:30 PM
Re: Removing sap from Doug Fir Timbers	bman4523	09/26/05 06:42 PM
Re: Removing sap from Doug Fir Timbers	nvh-srjones	09/27/05 11:09 PM
Re: Removing sap from Doug Fir Timbers	daiku	09/27/05 11:43 PM
Re: Removing sap from Doug Fir Timbers	John Buday	09/29/05 02:33 AM
Re: Removing sap from Doug Fir Timbers	Chris Hall	10/05/05 03:29 PM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)

Responsive Width:

PHP: 8.3.33 Page Time: 0.083s Queries: 17 (0.060s) Memory: 2.9881 MB (Peak: 3.5633 MB) Data Comp: Off Server Time: 2026-09-16 23:38:55 UTC
Valid HTML 5 and Valid CSS