Register Log In

Timber Framers Guild Forums General General Forum Questions Curved Glue Lam

Print Thread

Rate Thread

Re: Curved Glue Lam bmike #21220 09/23/09 03:43 AM
Joined: Jul 2004 Posts: 122 Williams Lake, BC, Canada B Brock Smith Member
Brock Smith Member B Joined: Jul 2004 Posts: 122 Williams Lake, BC, Canada	Length is 10', material is DF, not sure of the radius, but the curve is 15" over the 10' span. It is structural - it is the tie for a KP truss. The arch. has recommended 3/4" laminations. The plans and process have been reviewed by our engineer. Brock

Entire Thread
Subject	Posted By	Posted
Curved Glue Lam	Brock Smith	09/22/09 04:55 AM
Re: Curved Glue Lam	Gabel	09/22/09 11:42 AM
Re: Curved Glue Lam	bmike	09/22/09 01:03 PM
Re: Curved Glue Lam	Brock Smith	09/23/09 03:43 AM
Re: Curved Glue Lam	Gabel	09/23/09 11:31 AM
Re: Curved Glue Lam	bmike	09/23/09 03:48 PM
Re: Curved Glue Lam	Brock Smith	09/23/09 09:12 PM
Re: Curved Glue Lam	mo	09/25/09 11:35 PM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)

Responsive Width:

PHP: 8.3.33 Page Time: 0.045s Queries: 18 (0.033s) Memory: 2.9936 MB (Peak: 3.5633 MB) Data Comp: Off Server Time: 2026-09-16 17:38:03 UTC
Valid HTML 5 and Valid CSS