Register Log In

Timber Framers Guild Forums General General Forum Questions Beam Boring Machines

Print Thread

Rate Thread

Re: Beam Boring Machines #2208 12/30/05 07:34 PM
Joined: Apr 1999 Posts: 245 Grafton, IL. USA Tom Cundiff Member
Tom Cundiff Member Joined: Apr 1999 Posts: 245 Grafton, IL. USA	The Boss has two speeds for different hole sizes, slow for the 2" for the mortice and fast for the 1" for the peg. The Ajax chuck is hollow to allow the use of T-auger bits without cutting them off. Tom Not all who wander are lost.

Entire Thread
Subject	Posted By	Posted
Beam Boring Machines	icustomcut	12/28/05 01:31 AM
Re: Beam Boring Machines	Jim Rogers	12/29/05 12:34 AM
Re: Beam Boring Machines	Greg E	12/29/05 07:21 PM
Re: Beam Boring Machines	Dan F	12/29/05 08:14 PM
Re: Beam Boring Machines	icustomcut	12/29/05 09:58 PM
Re: Beam Boring Machines	Jim Rogers	12/29/05 10:33 PM
Re: Beam Boring Machines	Tom Cundiff	12/30/05 07:34 PM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)

Responsive Width:

PHP: 8.3.33 Page Time: 0.058s Queries: 17 (0.046s) Memory: 2.9900 MB (Peak: 3.5639 MB) Data Comp: Off Server Time: 2026-09-16 19:58:52 UTC
Valid HTML 5 and Valid CSS