Register Log In

Timber Framers Guild Forums Tools Tool Forum Custom Bevel Guage

Print Thread

Rate Thread

Re: Custom Bevel Guage mo #22574 02/07/10 11:48 PM
Joined: Dec 2007 Posts: 1,882 Maine T TIMBEAL Member
TIMBEAL Member T Joined: Dec 2007 Posts: 1,882 Maine	I have been using a framing square sandwiched between two pieces of aluminum angle iron. The 2" stock is wide enough to assist with timbers with wane. Probably not the same need as you described but is adjustable to any angle. Tim

Entire Thread
Subject	Posted By	Posted
Custom Bevel Guage	mo	02/07/10 05:17 PM
Re: Custom Bevel Guage	Robert Leslie	02/07/10 08:05 PM
Re: Custom Bevel Guage	mo	02/07/10 09:54 PM
Re: Custom Bevel Guage	TIMBEAL	02/07/10 10:00 PM
Re: Custom Bevel Guage	mo	02/07/10 10:38 PM
Re: Custom Bevel Guage	TIMBEAL	02/07/10 11:48 PM
Re: Custom Bevel Guage	bub4e	02/08/10 02:07 AM
Re: Custom Bevel Guage	Jim Rogers	02/08/10 12:53 PM
Re: Custom Bevel Guage	Gabel	02/09/10 12:52 AM
Re: Custom Bevel Guage	daiku	02/09/10 01:30 AM
Re: Custom Bevel Guage	mo	02/09/10 03:54 PM
Re: Custom Bevel Guage	Will Truax	02/16/10 01:47 AM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)

Responsive Width:

PHP: 8.3.33 Page Time: 0.195s Queries: 18 (0.169s) Memory: 3.0027 MB (Peak: 3.5634 MB) Data Comp: Off Server Time: 2026-09-17 03:00:44 UTC
Valid HTML 5 and Valid CSS