Timber Framers Guild Forums General General Forum Questions Auger Bits / Peg Holes

Print Thread

Rate Thread

Re: Auger Bits / Peg Holes #2343 03/02/06 04:09 PM
Joined: Jun 2002 Posts: 136 Lakebay Wa. J John Buday Member
John Buday Member J Joined: Jun 2002 Posts: 136 Lakebay Wa.	Dave Yes, the wood owl bits sold by Timberwolf are spured.

Entire Thread
Subject	Posted By	Posted
Auger Bits / Peg Holes	J. ODonnell	02/15/06 01:37 PM
Re: Auger Bits / Peg Holes	Emmett Greenleaf	02/15/06 10:24 PM
Re: Auger Bits / Peg Holes	Dan F	02/16/06 12:15 AM
Re: Auger Bits / Peg Holes	Dave Petrina	02/16/06 10:31 AM
Re: Auger Bits / Peg Holes	daiku	02/16/06 05:58 PM
Re: Auger Bits / Peg Holes	J. ODonnell	02/17/06 12:36 AM
Re: Auger Bits / Peg Holes	RWW	02/17/06 01:52 AM
Re: Auger Bits / Peg Holes	Emmett Greenleaf	02/17/06 05:04 AM
Re: Auger Bits / Peg Holes	RWW	02/17/06 01:14 PM
Re: Auger Bits / Peg Holes	Mark Davidson	02/17/06 01:46 PM
Re: Auger Bits / Peg Holes	Andy Harper	02/17/06 02:11 PM
Re: Auger Bits / Peg Holes	J. ODonnell	02/18/06 12:11 AM
Re: Auger Bits / Peg Holes	Mark Davidson	02/18/06 02:15 AM
Re: Auger Bits / Peg Holes	Jed Eichel	02/18/06 02:50 AM
Re: Auger Bits / Peg Holes	Emmett Greenleaf	02/18/06 05:19 AM
Re: Auger Bits / Peg Holes	RWW	02/18/06 12:21 PM
Re: Auger Bits / Peg Holes	Dan Miller	02/18/06 12:54 PM
Re: Auger Bits / Peg Holes	Dave Petrina	02/18/06 06:17 PM
Re: Auger Bits / Peg Holes	John Buday	03/02/06 04:09 PM
Re: Auger Bits / Peg Holes	daiku	03/03/06 06:21 PM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

Newest Members

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Responsive Width:

PHP: 8.3.33 Page Time: 0.074s Queries: 17 (0.058s) Memory: 3.0161 MB (Peak: 3.5639 MB) Data Comp: Off Server Time: 2026-09-16 23:17:55 UTC
Valid HTML 5 and Valid CSS