Register Log In

Timber Framers Guild Forums Tools Software Stuck on creating new joint from scratch.

Print Thread

Rate Thread

Re: Stuck on creating new joint from scratch. #24809 11/29/10 06:02 PM
Joined: Apr 2002 Posts: 895 Minneapolis, Minnesota daiku Member
daiku Member Joined: Apr 2002 Posts: 895 Minneapolis, Minnesota	Regarding placement of peg holes, that's more of a desing/engineering question, not software. That will depend on the tension load on the joint, and the species of wood. CB. -- Clark Bremer Minneapolis Proud Member of the TFG

Entire Thread
Subject	Posted By	Posted
Stuck on creating new joint from scratch.	Ken Heath	11/28/10 03:51 AM
Re: Stuck on creating new joint from scratch.	bmike	11/28/10 11:25 AM
Re: Stuck on creating new joint from scratch.	Ken Heath	11/28/10 03:30 PM
Re: Stuck on creating new joint from scratch.	Chris Hall	12/01/10 12:40 AM
Re: Stuck on creating new joint from scratch.	Ken Heath	12/09/10 11:27 PM
Re: Stuck on creating new joint from scratch.	bmike	11/29/10 11:43 AM
Re: Stuck on creating new joint from scratch.	daiku	11/29/10 06:01 PM
Re: Stuck on creating new joint from scratch.	daiku	11/29/10 06:02 PM
Re: Stuck on creating new joint from scratch.	bmike	12/10/10 02:04 PM

Moderated by Jim Rogers, mdfinc, Paul Freeman

Hop To

Link Copied to Clipboard

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)

Responsive Width:

PHP: 8.3.33 Page Time: 0.068s Queries: 17 (0.049s) Memory: 2.9928 MB (Peak: 3.5603 MB) Data Comp: Off Server Time: 2026-09-16 22:18:59 UTC
Valid HTML 5 and Valid CSS