Register Log In

Timber Framers Guild Forums Tools Software Stuck on creating new joint from scratch.

Print Thread

Rate Thread

Re: Stuck on creating new joint from scratch. #24858 12/10/10 02:04 PM
Joined: Jan 2008 Posts: 918 Burlington, VT B bmike Member
bmike Member B Joined: Jan 2008 Posts: 918 Burlington, VT	Edit the timber component and right click on the joint component. It should show something like 'TF ID: joint'. If not, something is amiss. Mike Beganyi Design and Consulting, LLC. www.mikebeganyi.com

Entire Thread
Subject	Posted By	Posted
Stuck on creating new joint from scratch.	Ken Heath	11/28/10 03:51 AM
Re: Stuck on creating new joint from scratch.	bmike	11/28/10 11:25 AM
Re: Stuck on creating new joint from scratch.	Ken Heath	11/28/10 03:30 PM
Re: Stuck on creating new joint from scratch.	Chris Hall	12/01/10 12:40 AM
Re: Stuck on creating new joint from scratch.	Ken Heath	12/09/10 11:27 PM
Re: Stuck on creating new joint from scratch.	bmike	11/29/10 11:43 AM
Re: Stuck on creating new joint from scratch.	daiku	11/29/10 06:01 PM
Re: Stuck on creating new joint from scratch.	daiku	11/29/10 06:02 PM
Re: Stuck on creating new joint from scratch.	bmike	12/10/10 02:04 PM

Moderated by Jim Rogers, mdfinc, Paul Freeman

Hop To

Link Copied to Clipboard

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)

Responsive Width:

PHP: 8.3.33 Page Time: 0.062s Queries: 17 (0.038s) Memory: 2.9944 MB (Peak: 3.5633 MB) Data Comp: Off Server Time: 2026-09-17 01:04:13 UTC
Valid HTML 5 and Valid CSS