Register Log In

Timber Framers Guild Forums Tools Tool Forum Chappell Universal Square

Print Thread

Rate Thread

Re: Chappell Universal Square #25837 03/08/11 03:56 AM
Joined: Feb 2006 Posts: 718 Alford, MA Dave Shepard Member
Dave Shepard Member Joined: Feb 2006 Posts: 718 Alford, MA	I didn't notice markings in 16ths. I work in 1/16", 1/8", 1/4" etc., sometimes even in schquarters, but never in tenths or twentieths. Member, Timber Framers Guild

Entire Thread
Subject	Posted By	Posted
Chappell Universal Square	bij	03/06/11 01:42 AM
Re: Chappell Universal Square	Bob Smith	03/08/11 02:31 AM
Re: Chappell Universal Square	mo	03/06/11 05:05 AM
Re: Chappell Universal Square	Jim Rogers	03/06/11 03:12 PM
Re: Chappell Universal Square	TIMBEAL	03/06/11 10:44 PM
Re: Chappell Universal Square	Dave Shepard	03/08/11 03:56 AM
Re: Chappell Universal Square	Bob Smith	03/08/11 04:23 AM
Re: Chappell Universal Square	TIMBEAL	03/08/11 12:49 PM
Re: Chappell Universal Square	Pete Ladd	03/27/11 02:49 PM
Re: Chappell Universal Square	Dave Shepard	03/27/11 07:18 PM
Re: Chappell Universal Square	Pete Ladd	03/29/11 02:39 AM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)

Responsive Width:

PHP: 8.3.33 Page Time: 0.054s Queries: 17 (0.042s) Memory: 2.9977 MB (Peak: 3.5634 MB) Data Comp: Off Server Time: 2026-09-16 17:37:32 UTC
Valid HTML 5 and Valid CSS