Thanks everybody
The shed is up, steel roof is on, and it is solid.
Hemlock frame, Pegs came from old potato crates, mixture of ash, maple, and elm. Made them on the table saw (not the safest thing I've done).
I regret not using a wedged half dovetail for the girts. I can now see the importance, I will do that in the future.
I did my first stop splayed scarf with wedges, turned out okay. Its not perfect which drives me crazy, but its working. I did have to place the scarf over the post, because of timber length available. I spliced together the rear top plate with a maple spline.
Bird mouth rafters, toe nailed down.
Just waiting for some board and batten to put up, then its done.
I'll post some pictures when it is completed, thanks for all your advice. I hope I can contribute to this community in time.
