The wall infill system will be:

1st layer - Hand hewn pine logs with tenons on both sides (160 mm thick) that will join in the mortise inside the posts (the long groove) that you can see in the photos that I have posted below.

2nd layer - 250 mm thick pine wood shaving mix with dry clay.

3rd layer - 25mm thick pine boarding (as the rough siding)

4th layer - 25mm thick vertical pine board siding (as the finishing).

So the whole thickness of the wall will be approx 50 cm.

I am the "victim" of the ecological philosophy - so that's why I was looking for possibilities to insulate the house with natural materials.

The realistic design photo is one prototype of my house. I took a picture of it and then in the Photoshop placed it just in the place were my house will come up. So my house will be very similar to the one you can see in the picture.

See the link for design pictures in flickr:

http://www.flickr.com/photos/64220150@N06/sets/72157627151434929/with/5973197263/

Last edited by nebruks; 07/25/11 09:47 AM.