Register Log In

Timber Framers Guild Forums General General Forum Questions layout on timber with varying dimensions

Print Thread

Rate Thread

Re: layout on timber with varying dimensions #2698 07/28/06 07:16 AM
Joined: Jan 2004 Posts: 40 Czech Republic M Michal Zajic Member
Michal Zajic Member M Joined: Jan 2004 Posts: 40 Czech Republic	Hi You can go with two reference sides or center line. I'd suggest center line for inside timbers and two reference sides for perimeter and any wall adjacted timbers in general. Good luck Michal Mr. Michal Zajic Timber Frame Design http://www.tfdesign.cz

Entire Thread
Subject	Posted By	Posted
layout on timber with varying dimensions	chichi1golf	07/28/06 03:56 AM
Re: layout on timber with varying dimensions	Michal Zajic	07/28/06 07:16 AM
Re: layout on timber with varying dimensions	Dan Miller	07/28/06 12:16 PM
Re: layout on timber with varying dimensions	Joel McCarty	07/28/06 12:53 PM
Re: layout on timber with varying dimensions	chichi1golf	07/28/06 01:34 PM
Re: layout on timber with varying dimensions	Dan F	08/06/06 02:37 PM
Re: layout on timber with varying dimensions	northern hewer	08/07/06 02:02 AM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)

Responsive Width:

PHP: 8.3.33 Page Time: 0.206s Queries: 17 (0.185s) Memory: 2.9896 MB (Peak: 3.5632 MB) Data Comp: Off Server Time: 2026-09-17 01:26:10 UTC
Valid HTML 5 and Valid CSS