Timber Framers Guild Forums General General Forum Questions Pegs Too Big

Print Thread

Rate Thread

Re: Pegs Too Big #27091 09/03/11 12:48 PM
Joined: Mar 2002 Posts: 965 K Ken Hume Member
Ken Hume Member K Joined: Mar 2002 Posts: 965	Hi Mo, Here is a link to the peg sharpener rotary plane :- http://www.ashemcrafts.com/ Regards Ken Hume Looking back to see the way ahead !

Entire Thread
Subject	Posted By	Posted
Pegs Too Big	mo	09/02/11 11:37 PM
Re: Pegs Too Big	D L Bahler	09/02/11 11:58 PM
Re: Pegs Too Big	TIMBEAL	09/03/11 02:28 AM
Re: Pegs Too Big	Ken Hume	09/03/11 08:15 AM
Re: Pegs Too Big	bmike	09/03/11 10:28 AM
Re: Pegs Too Big	Cecile en Don Wa	09/03/11 11:27 AM
Re: Pegs Too Big	Ken Hume	09/03/11 12:48 PM
Re: Pegs Too Big	brad_bb	09/03/11 01:51 PM
Re: Pegs Too Big	Cecile en Don Wa	09/03/11 03:30 PM
Re: Pegs Too Big	mo	09/03/11 04:20 PM
Re: Pegs Too Big	Thane O'Dell	09/03/11 10:32 PM
Re: Pegs Too Big	Jim Rogers	09/04/11 04:51 PM
Re: Pegs Too Big	Simon Says	09/10/11 10:29 PM
Re: Pegs Too Big	eric sammons	09/15/11 04:08 PM
Re: Pegs Too Big	mo	10/04/11 09:01 PM
Re: Pegs Too Big	Dave Shepard	10/05/11 12:45 AM
Re: Pegs Too Big	D L Bahler	10/05/11 02:19 AM
Re: Pegs Too Big	mo	10/05/11 02:56 AM
Re: Pegs Too Big	mo	10/05/11 02:57 AM
Re: Pegs Too Big	D L Bahler	10/05/11 03:28 AM
Re: Pegs Too Big	Ken Hume	10/05/11 08:05 AM
Re: Pegs Too Big	TIMBEAL	10/05/11 09:09 AM
Re: Pegs Too Big	bmike	10/05/11 06:16 PM
Re: Pegs Too Big	Thane O'Dell	10/05/11 10:41 PM
Re: Pegs Too Big	mo	10/07/11 10:45 PM
Re: Pegs Too Big	daiku	10/10/11 12:33 PM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

Newest Members

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Responsive Width:

PHP: 8.3.33 Page Time: 0.065s Queries: 17 (0.048s) Memory: 3.0284 MB (Peak: 3.5633 MB) Data Comp: Off Server Time: 2026-09-17 01:31:52 UTC
Valid HTML 5 and Valid CSS