Register Log In

Timber Framers Guild Forums Tools Tool Forum ship augers

Print Thread

Rate Thread

ship augers #27264 09/21/11 10:09 PM
Joined: Nov 2003 Posts: 1,124 Keene,Ontario, Canada M Mark Davidson Member
Mark Davidson Member M Joined: Nov 2003 Posts: 1,124 Keene,Ontario, Canada	Hi all, Ok, am now getting sick of the "high speed" ship augers that are sold everywhere... I would like a "low speed" auger that has a clean entry. I would appreciate any suggestions that you may have in this area, I'm ready to get some decent augers, Specifically long bits(16") that will be used in a power drill. thanks!

Entire Thread
Subject	Posted By	Posted
ship augers	Mark Davidson	09/21/11 10:09 PM
Re: ship augers	daiku	09/22/11 12:57 PM
Re: ship augers	TIMBEAL	09/22/11 12:27 AM
Re: ship augers	Mark Davidson	09/24/11 01:11 AM
Re: ship augers	TIMBEAL	09/24/11 12:08 PM
Re: ship augers	Gabel	09/28/11 09:46 PM
Re: ship augers	daiku	09/29/11 12:59 PM
Re: ship augers	Mark Davidson	10/05/11 03:45 AM
Re: ship augers	Addicted	12/23/11 02:02 AM
Re: ship augers	Cecile en Don Wa	12/23/11 07:59 AM
Re: ship augers	TIMBEAL	12/23/11 11:18 AM
Re: ship augers	Cecile en Don Wa	12/23/11 11:58 AM
Re: ship augers	TIMBEAL	12/23/11 03:37 PM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)

Responsive Width:

PHP: 8.3.33 Page Time: 0.067s Queries: 17 (0.047s) Memory: 3.0037 MB (Peak: 3.5636 MB) Data Comp: Off Server Time: 2026-09-16 20:02:00 UTC
Valid HTML 5 and Valid CSS