Timber Framers Guild Forums General General Forum Questions 3x6 t&g

Print Thread

Rate Thread

Re: 3x6 t&g TIMBEAL #27698 11/29/11 01:46 AM
Joined: Jan 2003 Posts: 106 Greely, Canada R Ray Gibbs Member
Ray Gibbs Member R Joined: Jan 2003 Posts: 106 Greely, Canada	I also think the 8" spike is a little much. These are planed to about 2.25 x 5.25 so there is a good chunk of nail/screw biting. I was thinking #10 x 4" R4 GRK'S.

Entire Thread
Subject	Posted By	Posted
3x6 t&g	Ray Gibbs	11/23/11 10:44 PM
Re: 3x6 t&g	timberwrestler	11/27/11 11:12 PM
Re: 3x6 t&g	Gumphri	11/28/11 03:58 AM
Re: 3x6 t&g	bmike	11/28/11 01:24 PM
Re: 3x6 t&g	Ray Gibbs	11/28/11 02:01 PM
Re: 3x6 t&g	bmike	11/28/11 02:49 PM
Re: 3x6 t&g	brad_bb	11/28/11 03:35 PM
Re: 3x6 t&g	Ray Gibbs	11/28/11 04:01 PM
Re: 3x6 t&g	bmike	11/28/11 04:05 PM
Re: 3x6 t&g	Ray Gibbs	11/29/11 12:59 AM
Re: 3x6 t&g	TIMBEAL	11/29/11 01:22 AM
Re: 3x6 t&g	Ray Gibbs	11/29/11 01:46 AM
Re: 3x6 t&g	TIMBEAL	11/29/11 11:40 AM
Re: 3x6 t&g	Gabel	12/01/11 12:03 PM
Re: 3x6 t&g	Ray Gibbs	12/01/11 03:21 PM
Re: 3x6 t&g	Gabel	12/01/11 10:33 PM
Re: 3x6 t&g	Waccabuc	01/17/12 11:12 AM
Re: 3x6 t&g	Ray Gibbs	01/19/12 04:54 PM
Re: 3x6 t&g	Joel McCarty	01/19/12 07:31 PM
Re: 3x6 t&g	Ray Gibbs	01/19/12 09:20 PM
Re: 3x6 t&g	Joel McCarty	01/19/12 09:52 PM
Re: 3x6 t&g	timberwrestler	01/20/12 12:21 AM
Re: 3x6 t&g	Ray Gibbs	01/20/12 01:05 AM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

Newest Members

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Responsive Width:

PHP: 8.3.33 Page Time: 0.054s Queries: 18 (0.043s) Memory: 3.0297 MB (Peak: 3.5643 MB) Data Comp: Off Server Time: 2026-09-16 22:45:29 UTC
Valid HTML 5 and Valid CSS