Sharpening concerns- chisel, slick, and drill bits - Timber Frame Forums

Register Log In Timber Framers Guild Forums Tool Forum Sharpening concerns- chisel, slick, and drill bits

Print Thread

Rate Thread

Sharpening concerns- chisel, slick, and drill bits #29318 07/02/12 02:12 AM
Joined: Jun 2012 Posts: 6 C CHIPSTER OP Member
OP CHIPSTER Member C Joined: Jun 2012 Posts: 6	Had four 2" drill bits sent to sharpening service. On each the lead screw was nicked. Can these be restored? How? Or are they trash? Have a 3" slick that had the edge beveled in an arc. Could this be original grind or was this an artifact of previous sharpening? If intentional, why? For some special purpose? Some of the corner chisels I have scrounged have a point at the middle where the two beveled surfaces meet. Intentional or an artifact of previous sharpening? I am an amateur who has taken a timber frame course and I am trying to build an 8'X12' shed for an RV campsite, using timber drill and other traditional tools. Thanks for your thoughts.

Entire Thread
Subject	Posted By	Posted
Sharpening concerns- chisel, slick, and drill bits	CHIPSTER	07/02/12 02:12 AM
Re: Sharpening concerns- chisel, slick, and drill bits	Jim Rogers	07/02/12 02:55 PM
Re: Sharpening concerns- chisel, slick, and drill bits	CHIPSTER	07/03/12 02:24 AM
Re: Sharpening concerns- chisel, slick, and drill bits	D Wagstaff	07/03/12 07:10 AM
Re: Sharpening concerns- chisel, slick, and drill bits	TIMBEAL	07/03/12 09:53 AM
Re: Sharpening concerns- chisel, slick, and drill bits	CHIPSTER	07/31/12 05:26 PM
Re: Sharpening concerns- chisel, slick, and drill bits	CHIPSTER	07/31/12 05:03 PM
Re: Sharpening concerns- chisel, slick, and drill bits	Jim Rogers	07/03/12 11:01 AM
Re: Sharpening concerns- chisel, slick, and drill bits	D Wagstaff	07/03/12 02:09 PM
Re: Sharpening concerns- chisel, slick, and drill bits	CHIPSTER	07/31/12 05:29 PM
Re: Sharpening concerns- chisel, slick, and drill bits	CHIPSTER	07/31/12 05:19 PM

Moderated by Jim Rogers, mdfinc

Hop To

Newest Members

ScottEllis, ChrisGonzalez, Jackson, Taffswell, CharlieM
5142 Registered Users

show/hide columns on this page

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)

PHP: 5.4.45 Page Time: 0.086s Queries: 16 (0.053s) Memory: 3.1702 MB (Peak: 3.5816 MB) Data Comp: Off Server Time: 2024-06-17 15:27:44 UTC
Valid HTML 5 and Valid CSS