Timber Framers Guild Forums Tools Timber Engineering Cutting housings with a router?

Print Thread

Rate Thread

Re: Cutting housings with a router? BTF #29682 10/02/12 11:00 AM
Joined: Dec 2007 Posts: 1,882 Maine T TIMBEAL Member
TIMBEAL Member T Joined: Dec 2007 Posts: 1,882 Maine	Do you have to do additional chisel work after the router? Example scoop the bottom of the housing to allow for drying and shrinkage?

Entire Thread
Subject	Posted By	Posted
Cutting housings with a router?	galen	09/15/12 03:53 AM
Re: Cutting housings with a router?	daiku	09/17/12 03:13 PM
Re: Cutting housings with a router?	BTF	10/02/12 04:55 AM
Re: Cutting housings with a router?	TIMBEAL	10/02/12 11:00 AM
Re: Cutting housings with a router?	bmike	10/02/12 12:00 PM
Re: Cutting housings with a router?	BTF	10/02/12 05:56 PM
Re: Cutting housings with a router?	TIMBEAL	10/05/12 10:44 AM
Re: Cutting housings with a router?	bmike	10/05/12 12:16 PM
Re: Cutting housings with a router?	BTF	10/08/12 02:45 PM
Re: Cutting housings with a router?	bmike	10/08/12 03:10 PM
Re: Cutting housings with a router?	BTF	10/08/12 04:23 PM
Re: Cutting housings with a router?	bmike	10/08/12 04:49 PM
Re: Cutting housings with a router?	bmike	10/08/12 04:50 PM
Re: Cutting housings with a router?	BTF	10/08/12 05:03 PM
Re: Cutting housings with a router?	BTF	10/08/12 04:58 PM
Re: Cutting housings with a router?	bmike	10/08/12 06:40 PM
Re: Cutting housings with a router?	TIMBEAL	10/08/12 10:45 PM
Re: Cutting housings with a router?	BTF	10/11/12 02:50 AM
Re: Cutting housings with a router?	BTF	11/17/12 03:40 AM
Re: Cutting housings with a router?	BTF	11/17/12 03:43 AM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

Newest Members

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Responsive Width:

PHP: 8.3.33 Page Time: 0.046s Queries: 18 (0.031s) Memory: 3.0205 MB (Peak: 3.5634 MB) Data Comp: Off Server Time: 2026-09-16 19:46:35 UTC
Valid HTML 5 and Valid CSS