Timber Framers Guild Forums Tools Timber Engineering Cutting housings with a router?

Print Thread

Rate Thread

Re: Cutting housings with a router? bmike #29715 10/08/12 04:23 PM
Joined: Jun 2009 Posts: 19 Calgary, Ab. CDN B BTF Member
BTF Member B Joined: Jun 2009 Posts: 19 Calgary, Ab. CDN	Sorry, I missunderstood the comments and/or techniques. But if someone wants to cut housings with a router, the festool jig with the sliding table works great to get an accurate housing with a flat bottom.

Entire Thread
Subject	Posted By	Posted
Cutting housings with a router?	galen	09/15/12 03:53 AM
Re: Cutting housings with a router?	daiku	09/17/12 03:13 PM
Re: Cutting housings with a router?	BTF	10/02/12 04:55 AM
Re: Cutting housings with a router?	TIMBEAL	10/02/12 11:00 AM
Re: Cutting housings with a router?	bmike	10/02/12 12:00 PM
Re: Cutting housings with a router?	BTF	10/02/12 05:56 PM
Re: Cutting housings with a router?	TIMBEAL	10/05/12 10:44 AM
Re: Cutting housings with a router?	bmike	10/05/12 12:16 PM
Re: Cutting housings with a router?	BTF	10/08/12 02:45 PM
Re: Cutting housings with a router?	bmike	10/08/12 03:10 PM
Re: Cutting housings with a router?	BTF	10/08/12 04:23 PM
Re: Cutting housings with a router?	bmike	10/08/12 04:49 PM
Re: Cutting housings with a router?	bmike	10/08/12 04:50 PM
Re: Cutting housings with a router?	BTF	10/08/12 05:03 PM
Re: Cutting housings with a router?	BTF	10/08/12 04:58 PM
Re: Cutting housings with a router?	bmike	10/08/12 06:40 PM
Re: Cutting housings with a router?	TIMBEAL	10/08/12 10:45 PM
Re: Cutting housings with a router?	BTF	10/11/12 02:50 AM
Re: Cutting housings with a router?	BTF	11/17/12 03:40 AM
Re: Cutting housings with a router?	BTF	11/17/12 03:43 AM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

Newest Members

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Responsive Width:

PHP: 8.3.33 Page Time: 0.068s Queries: 17 (0.049s) Memory: 3.0206 MB (Peak: 3.5633 MB) Data Comp: Off Server Time: 2026-09-16 16:55:35 UTC
Valid HTML 5 and Valid CSS