Register Log In

Timber Framers Guild Forums General General Forum Questions Finishing the curved surface of oak braces

Print Thread

Rate Thread

Re: Finishing the curved surface of oak braces Maff #30894 08/09/13 06:40 PM
Joined: Feb 2006 Posts: 718 Alford, MA Dave Shepard Member
Dave Shepard Member Joined: Feb 2006 Posts: 718 Alford, MA	Drawknife and spokeshave will work well. Compass plane would be a slow and expensive option. Member, Timber Framers Guild

Entire Thread
Subject	Posted By	Posted
Finishing the curved surface of oak braces	Maff	08/09/13 05:44 PM
Re: Finishing the curved surface of oak braces	Dave Shepard	08/09/13 06:40 PM
Re: Finishing the curved surface of oak braces	D L Bahler	08/09/13 07:17 PM
Re: Finishing the curved surface of oak braces	D L Bahler	08/09/13 07:17 PM
Re: Finishing the curved surface of oak braces	TIMBEAL	08/09/13 10:00 PM
Re: Finishing the curved surface of oak braces	Roger Nair	08/09/13 10:27 PM
Re: Finishing the curved surface of oak braces	Jim Rogers	08/12/13 08:41 PM
Re: Finishing the curved surface of oak braces	Thane O'Dell	08/15/13 04:11 PM
Re: Finishing the curved surface of oak braces	Windknot	08/18/13 04:06 AM
Re: Finishing the curved surface of oak braces	TIMBEAL	08/18/13 11:31 AM
Re: Finishing the curved surface of oak braces	Will_T	08/18/13 06:59 PM
Re: Finishing the curved surface of oak braces	TIMBEAL	08/18/13 07:38 PM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)

Responsive Width:

PHP: 8.3.33 Page Time: 0.051s Queries: 18 (0.037s) Memory: 3.0044 MB (Peak: 3.5639 MB) Data Comp: Off Server Time: 2026-09-16 23:18:06 UTC
Valid HTML 5 and Valid CSS