Register Log In

Timber Framers Guild Forums General General Forum Questions Finishing the curved surface of oak braces

Print Thread

Rate Thread

Re: Finishing the curved surface of oak braces Dave Shepard #30896 08/09/13 07:17 PM
Joined: May 2010 Posts: 946 Indiana D L Bahler Member
D L Bahler Member Joined: May 2010 Posts: 946 Indiana	Also, you can use a rotary sanding drum mounted on an electric drill for final finishing. Was de eine il�chtet isch f�r angeri villech nid so klar. http://riegelbau.wordpress.com/

Entire Thread
Subject	Posted By	Posted
Finishing the curved surface of oak braces	Maff	08/09/13 05:44 PM
Re: Finishing the curved surface of oak braces	Dave Shepard	08/09/13 06:40 PM
Re: Finishing the curved surface of oak braces	D L Bahler	08/09/13 07:17 PM
Re: Finishing the curved surface of oak braces	D L Bahler	08/09/13 07:17 PM
Re: Finishing the curved surface of oak braces	TIMBEAL	08/09/13 10:00 PM
Re: Finishing the curved surface of oak braces	Roger Nair	08/09/13 10:27 PM
Re: Finishing the curved surface of oak braces	Jim Rogers	08/12/13 08:41 PM
Re: Finishing the curved surface of oak braces	Thane O'Dell	08/15/13 04:11 PM
Re: Finishing the curved surface of oak braces	Windknot	08/18/13 04:06 AM
Re: Finishing the curved surface of oak braces	TIMBEAL	08/18/13 11:31 AM
Re: Finishing the curved surface of oak braces	Will_T	08/18/13 06:59 PM
Re: Finishing the curved surface of oak braces	TIMBEAL	08/18/13 07:38 PM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)

Responsive Width:

PHP: 8.3.33 Page Time: 0.067s Queries: 18 (0.049s) Memory: 3.0042 MB (Peak: 3.5634 MB) Data Comp: Off Server Time: 2026-09-16 23:17:34 UTC
Valid HTML 5 and Valid CSS