Register Log In

Timber Framers Guild Forums General General Forum Questions Micron/Grit Equivalents

Print Thread

Rate Thread

Re: Micron/Grit Equivalents Ron Mansour #32038 02/18/14 12:46 AM
Joined: Dec 2007 Posts: 1,882 Maine T TIMBEAL Member
TIMBEAL Member T Joined: Dec 2007 Posts: 1,882 Maine	I am a big fan of finishing with compound, green or gray. It really gives it a shine, and fun to see the fine thread worked off the blade.

Entire Thread
Subject	Posted By	Posted
Micron/Grit Equivalents	Ron Mansour	02/17/14 05:39 PM
Re: Micron/Grit Equivalents	Jim Rogers	02/17/14 06:20 PM
Re: Micron/Grit Equivalents	Ron Mansour	02/17/14 06:55 PM
Re: Micron/Grit Equivalents	Dave Shepard	02/17/14 09:00 PM
Re: Micron/Grit Equivalents	Roger Nair	02/17/14 11:43 PM
Re: Micron/Grit Equivalents	TIMBEAL	02/18/14 12:46 AM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)

Responsive Width:

PHP: 8.3.33 Page Time: 0.063s Queries: 18 (0.046s) Memory: 2.9888 MB (Peak: 3.5646 MB) Data Comp: Off Server Time: 2026-09-16 22:45:33 UTC
Valid HTML 5 and Valid CSS