finishing rough cut timbers - Timber Frame Forums

Register Log In Timber Framers Guild Forums Timber Engineering finishing rough cut timbers

Print Thread

Rate Thread

Re: finishing rough cut timbers #4351 04/02/02 11:05 PM
Joined: Oct 1999 Posts: 463 Bakerton, WV, USA R Roger Nair Member
Roger Nair Member R Joined: Oct 1999 Posts: 463 Bakerton, WV, USA	Try the timberframe oil finishes thread dated 3-12-99. http://www.tfguild.org/ubbcgibin/ultimatebb.cgi?ubb=get_topic;f=3;t=000004 I hope the link is correct.

Entire Thread
Subject	Posted By	Posted
finishing rough cut timbers	Chris	04/02/02 09:34 PM
Re: finishing rough cut timbers	Roger Nair	04/02/02 11:05 PM
Re: finishing rough cut timbers	Chris	04/02/02 11:27 PM
Re: finishing rough cut timbers	Roger Nair	04/02/02 11:51 PM
Re: finishing rough cut timbers	Rudy R Christian	04/03/02 12:33 PM

Moderated by Jim Rogers, mdfinc

Hop To

Newest Members

ScottEllis, ChrisGonzalez, Jackson, Taffswell, CharlieM
5142 Registered Users

show/hide columns on this page

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)

PHP: 5.4.45 Page Time: 0.082s Queries: 16 (0.051s) Memory: 3.1443 MB (Peak: 3.5830 MB) Data Comp: Off Server Time: 2024-06-17 17:21:06 UTC
Valid HTML 5 and Valid CSS