Register Log In

Timber Framers Guild Forums General General Forum Questions Routers for speed and precision

Print Thread

Rate Thread

Re: Routers for speed and precision #881 04/12/04 07:02 PM
Joined: Oct 1999 Posts: 463 Bakerton, WV, USA R Roger Nair Member
Roger Nair Member R Joined: Oct 1999 Posts: 463 Bakerton, WV, USA	Daiku The lock mortise routers certainly plunge 5 inches and use bits from 3/4 to 5/4 diameter but I do not recommend them for timber mortising.

Entire Thread
Subject	Posted By	Posted
Routers for speed and precision	Michel Dube	04/06/04 12:43 AM
Re: Routers for speed and precision	Mark Davidson	04/06/04 01:10 AM
Re: Routers for speed and precision	Shaun Garvey	04/06/04 03:21 PM
Re: Routers for speed and precision	Joel	04/06/04 09:31 PM
Re: Routers for speed and precision	Roger Nair	04/07/04 04:06 AM
Re: Routers for speed and precision	John Buday	04/08/04 05:34 AM
Re: Routers for speed and precision	Michel Dube	04/10/04 08:25 PM
Re: Routers for speed and precision	Michel Dube	04/10/04 08:26 PM
Re: Routers for speed and precision	Joel	04/12/04 01:26 PM
Re: Routers for speed and precision	daiku	04/12/04 06:51 PM
Re: Routers for speed and precision	Roger Nair	04/12/04 07:02 PM
Re: Routers for speed and precision	Michel Dube	04/13/04 10:39 PM
Re: Routers for speed and precision	daiku	04/14/04 12:53 AM
Re: Routers for speed and precision	k12rman	04/15/04 02:46 PM
Re: Routers for speed and precision	TerryKing	04/27/04 11:46 PM
Re: Routers for speed and precision	Timberbee	04/29/04 01:33 PM
Re: Routers for speed and precision	John Buday	06/05/04 11:57 PM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)

Responsive Width:

PHP: 8.3.33 Page Time: 0.139s Queries: 17 (0.116s) Memory: 3.0105 MB (Peak: 3.5634 MB) Data Comp: Off Server Time: 2026-09-17 03:01:02 UTC
Valid HTML 5 and Valid CSS