Timber Framers Guild Forums Tools Tool Forum identifying mark on an old gouge router

Print Thread

Rate Thread

Re: identifying mark on an old gouge router #9081 03/29/06 03:46 PM
Joined: Dec 2005 Posts: 18 Monroe, CT R rlipeles Member
rlipeles Member R Joined: Dec 2005 Posts: 18 Monroe, CT	That logo is usually close to the tang or socket on the bottom side of the chisel. On the top side of the chisel it is usually marked: W. BUTCHER, CAST STEEL

Entire Thread
Subject	Posted By	Posted
identifying mark on an old gouge router	Anne Yarbrough	03/29/06 08:01 AM
Re: identifying mark on an old gouge router	rlipeles	03/29/06 03:46 PM
Re: identifying mark on an old gouge router	Anne Yarbrough	04/01/06 01:29 AM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

Newest Members

graymatter, pgwalton, BeamCrawler, minimaple, Faber_Americanus
5,210 Registered Users

Responsive Width:

PHP: 8.3.33 Page Time: 0.062s Queries: 17 (0.045s) Memory: 2.9827 MB (Peak: 3.5647 MB) Data Comp: Off Server Time: 2026-09-16 20:02:46 UTC
Valid HTML 5 and Valid CSS