Previous Thread
Next Thread
Print Thread
Rate Thread
Tools For Sale List 12-26-08 #17580 12/26/08 11:08 PM
Joined: Mar 2002
Posts: 1,685
J
Jim Rogers Online Confused OP
Member
OP Online Confused
Member
J
Joined: Mar 2002
Posts: 1,685
(Updated 12/26/08)
Here is a list of tools currently available for sale.

These tools have been cleaned, sharpen, honed, and "some" have had handles replaced with new strike end rings.

Tools for sale

Slicks

1 3/4"--Douglas----------$105--2G
3"-------Humphrey--------$175--2M
3"-------Dover-------------$130--2S
3 1/2"--No Name----------$160--2T*
3 1/2"--Unreadable--------$125--2U
3 7/8"--Hand forged-------$185--2V
2 1/2"--AW Co.------------$175--2W

Corner Chisels

1 1/8"--Cook--------$90--2w
7/8"----Unreadable--$60--2y
1"------Ohio Tool-----$90--3b
3/4"----Unreadable---$59--3e
1"------Mix------------$85--3f
1 1/4"-PS&Wilcox-----$80--3g
1"-----Hart------------$75--3h
1"-----Unreadable-----$90--3i

Framing Chisels

1/2"-----Mortising Chisel---------$80--3A
2 1/8"---Galtz--------------------$90--3i
2"-------Barnard--------------------$105--4i
1 3/4"--Witherby--------------------$70--4J
2"-------PS&Wilcox------------------$95--4M
2"-------PS&Wilcox------------------$90--4N
2"-------Hart-------------------------$90--4O
9/16"---Sorby (lock mortise type)--$75--4P
2"-------Pexto-----------------------$105--4R
2"-------Douglas---------------------$80--4V
2"-------PS&Wilcox-------------------$95--4W
7/8"-----Pexto-----------------------$70--4X
1"-------Greenlee--------------------$60--4Y
2"--------Woodcraft------------------$80--5C
2"--------Douglas---------------------$90--5G
1 1/2"---Unreadable------------------$70--5H
2"--------PS&Wilcox------------------$90--5i
1"--------PS&Wilcox------------------$75--5J
1 1/2"---Union firmer-----------------$75--5L
1 1/2"---Unreadable------------------$80--5M
1 1/2"---Hartford---------------------$87--5N
1"--------Unreadable------------------$50--5O
1 1/2"---Mix---------------------------$80--5P
1 1/2"---Underhill----------------------$85--5Q
1 1/2"---Hand Forged-----------------$75--5R
1 1/2"---Hubbard & Curtis-------------$95--5S
1 1/2"---Underhill----------------------$75--5T

We also sell new leather sheaths/tip protectors for the above chisels and slicks.

Here is a list of Sheaths currently available for sale.

Sheathes Price List 6-7-08

Plain Leather #102............... $12 (new shipment just in)
Plain Leather #102.5............. $14 (new shipment just in)
Plain Leather #103................ $14 (new shipment just in)
Plain Leather #103.5DS........ $18
Plain Leather #104DS........... $18

These are brand new some have a hard plastic insert that prevents the chisel or slick from cutting the leather when inserted.

Some have been double stitched (DS).

I hope you will take advantage of this offer, these are nice leather sheaths.
If you would like a photo of a sheath, and your email program will accept pictures, I can send you one, just let me know.

All prices do not include shipping costs.

Draw Knives

8"--Unreadable---------------------$25- R
12"-Unreadable---------------------$35-S
9"-Hibbard-adjustable---------------$45-V

Boring Machines

All boring machines have been cleaned, inspected, repaired if needed, and tested to insure that work properly, and have been oiled and are ready to bore holes.

1872 Phillips------$210-Q2
Swan-adjustable-$225-J3
Millers Falls-------$525-N3
Swan-------------$185-Q3
Swan-------------$185-R3
Millers Falls-------$605-X3
Boss-adjustable--$315-Y3
Millers Falls-------$485-Z3


Boring Machine Bits

All boring machine bits been cleaned, inspected, repaired if needed, sharpened and tested to insure they work properly, and have been oiled and are ready to bore holes.

1 13/16"-60-@$25
1 1/4"----7E-@$25
1 1/4"----7G-@$25
1 9/16"---7V-@$30
1 1/4"-----8D-@$25
9/16"------8G-@$25
1 3/4"-----8H-@$30
1 1/4"-----8Q-@$30
1 15/16"--9C-@$30
1 3/4"-----9E-@$30
2 1/4"-----9M-@$25
1 15/16"--9N-@$30
2"---------10H-@$40
1 1/16"---10K-@$25
2"---------10N**-@$40
1 3/8"-----10P-@$30
1 15/16"--10Q-@$35
11-16"----10S-@$25
2"----------10T-@$35
2"----------10U-@$40
2"----------10V-@$40

Misc.

Spoke shaves, other planes and other tools:
Stanley #26 Jack Plane-----$45--M39
Sharpening Strops-----------$10--M54
Stanley #6 plane-------------$70--M63
Cabinet Maker vise-----------$30--M69 (no shipping available, pick up only)
Craftsman #6 plane----------$70--M75
5" Adze-------------------------$60--M82
Stanley double cut spoke shave-$22--M83
Jim's Slider----------------------$49--M86
1 3/8" Rabbet Plane-------------$30--M89
Craftsman GC corrugated sole--$65--M90
MF T-auger handle---------------$20--M91
Stanley #5 Plane-----------------$50--M94
Stanley #5 Plane-----------------$50--M95
Stanley #5 Plane-----------------$50--M96
11" Broad Axe Head--------------$105--M98 (no handle)
11" Broad Axe Head--------------$95--M99 (no handle)
1 1/2" Rabbet plane--------------$30--M100
2"----Rabbet plane---------------$45--M101
Broad Axe Handle-----------------$20--M102 (Fits axes with 1" x3" eye)
Broad Axe Handle-----------------$20--M103 (Fits axes with 1" x3" eye)
Broad Axe Handle-----------------$20--M104 (Fits axes with 1" x3" eye)


Bit and Brace Bits:
7/16” Shell Auger-$10-6G; 5/8” Shell Auger-$10-6H, 11/16” Ships Auger-$15-6i; 11/16” Ships Auger-$15-5J; 11/16” Ships Auger-$15-5K; 11/16” Shell Auger-$15-5L

Bit and Brace Bits; Not cleaned & Un-sharpened bits-all $1 each; sold as is:
¼” Pointed-5P; 3/8” Jennings-5R; 7/16” Irwin-5T; ½” Irwin-5U; ½” Irwin-5W; 9/16” Jennings-5X; 9/16” Jennings-5y; 9/16” Jennings-5Z; 5/8” Jennings-6A; 5/8” Jennings-6B; 5/8” Irwin-6D


I hope you will take advantage of this offer, these are nice tools.
If you would like a photo of a tool, and your email program will accept pictures, I can send you one, or I can send you a link to the gallery where the pictures are; just let me know.
All prices do not include shipping costs.

Jim Rogers

The id letter/number system after each tool price is my personal system to keep track of which item is which..


Whatever you do, have fun doing it!
Re: Tools For Sale List 12-26-08 [Re: Jim Rogers] #17594 12/30/08 09:30 PM
Joined: Mar 2002
Posts: 1,685
J
Jim Rogers Online Confused OP
Member
OP Online Confused
Member
J
Joined: Mar 2002
Posts: 1,685
Quite some time ago, while I was visiting with Jack Sobon he mentioned to me that he had lost his handsaw sharpener man.
This elderly man had be sharpening Jack's handsaws for many years, and it was his time to go to the great saw sharpening spot in heaven.....rest in peace and thanks for the many years of great service.......

Without a saw sharpener on hand, Jack had to find a new saw to use for his timber framing projects.

He told me he tried many different "new" handsaws and finally found one that he liked very much.

It is a Stanley SharpTooth handsaw.

The specs are: it is 26" long, with 11TPI (tips per inch) or 12 point.
It is for all wood types and is considered a "Fine Finish Saw".

It can be used as a cross cut saw as well as a rip saw.




Jack had mentioned to me that these are at times hard to find, and he suggested we stock a few of them for anyone who can't seem to find them in their local stores....

We have a couple on hand now if anyone should need one.....

Jim Rogers

PS:
Stanley Saw-----------------------$30--M105
Stanley Saw-----------------------$30--M106


Whatever you do, have fun doing it!
Re: Tools For Sale List 12-26-08 [Re: Jim Rogers] #17595 12/30/08 09:32 PM
Joined: Mar 2002
Posts: 1,685
J
Jim Rogers Online Confused OP
Member
OP Online Confused
Member
J
Joined: Mar 2002
Posts: 1,685
Recently we found a source for broad axe handles.
These handles will fit axe heads with a 1" x 3" eye.
The handle has a curve to it to offset the axe head so that your hands don't hit the log or timber as you are chopping with the axe.

As shown below:



The above picture is looking down the handle towards the end where the head would be attached.

These handles are basically straight other then the bend for the offset head. So what this means is you can hang your axe head either right handed or left handed as you see fit for the way you want to use the axe.

Each handle comes with a wooden hardwood wedge and a metal wedge for securing the handle to the axe head.



Of course you can always cut the handle shorter to your desired length.....


Jim Rogers


Whatever you do, have fun doing it!

Moderated by  Jim Rogers, mdfinc 

Newest Members
HFT, Wrongthinker, kaymaxi, RLTJohn, fendrishi
5134 Registered Users
Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 5.4.45 Page Time: 0.025s Queries: 16 (0.007s) Memory: 3.1271 MB (Peak: 3.5814 MB) Data Comp: Off Server Time: 2024-03-29 09:29:23 UTC
Valid HTML 5 and Valid CSS