Timber Framing Hand Tools for Sale
(Updated 6/3/11-PM)
Here is a list of tools currently available for sale.
These tools have been cleaned, sharpen, honed, and "some" have had handles replaced with new strike end rings.
Tools for sale
Slicks
3 5/8"--No Name----------$205--2Y
3 1/2"--Barton-------------$215--3B
2 5/8"--NoName------------$135-3i**+ (short handle)
Corner Chisels
1"-----Unreadable-----$90--3i
1"-----Douglas---------$105--3n
Framing Chisels
1/2"-----Mortising Chisel---------$80--3A
9/16"----Sorby lock mortise------$75-4P
7/8"-----Pexto-----------------------$70--4X
2"-------Samson------------------------$90--6F
1"-------Stanley Socket bevel edge-----$40--6M-1
1"-------Stanley Socket bevel edge-----$40--6N-2
1 15/16"-Crossman--------------------$75--6X
1"-------Union (New Old Stock)--------$70--7B
1"-------Union (New Old Stock)--------$70--7C
1"-------Union (New Old Stock)--------$70--7D
1 3/4"--Hart-----------------------------$70-7E
3/4"---Paring chisel (no ring)------------$50-7Q**+ (not restored)
1 1/2" Paring chisel (no ring)------------$75-7R**+ (not restored)
2"----- Framing Chisel-------------------$85-7T**+ (not restored)
2"----- Framing Chisel-------------------$85-7U**+ (not restored)
2"----- Framing Chisel (no ring)---------$85-7V**+ (not restored)
1 1/2"-Samson--------------------------$85-7W
1 1/2"-PS&W----------------------------$95-7X
2"------Buck-----------------------------$100-7Y
2"------Underhill-------------------------$110-7Z
3/4"---Greenlee-------------------------$70-8A
1 1/2"-Underhill-------------------------$80-8B
1 1/2"-Mix------------------------------$105-8C
1 1/2"-GreenLee-Reliance--------------$90-8D
1 1/2"-Jaxon----------------------------$80-8E
1"-----Howell & Co.----------------------$70-8i
2"-----William Ash & Co------------------$85-8J
1 1/2"-Underhill--------------------------$80-8M
1/2"---Douglas (mortising chisel)--------$65-8P
2"-----Witherby--------------------------$115-8Q
2"-----Butcher---------------------------$60-8R
1 1/2"-Hand forged----------------------$50-8S
1 1/2"-Buck------------------------------$95-8T
2"------Ohio Tool-------------------------$115-8V
2"------Mix-------------------------------$105-8W
2"------Underhill--------------------------$85-8Y
2"------G.A.Wilcox------------------------$90-9A
1 1/2"-L&IJWhite--------------------------100-9B
We also sell new leather sheaths/tip protectors for the above chisels and slicks.
Here is a list of Sheaths currently available for sale.
Sheathes Price List 6-7-08
Plain Leather #102............... Sold out
Plain Leather #102.5............. Sold out
Plain Leather #103................ $14
Plain Leather #103.5............. $18
Plain Leather #104................ $18
These are brand new.
I hope you will take advantage of this offer, these are nice leather sheaths.
If you would like a photo of a sheath, and your email program will accept pictures, I can send you one, just let me know.
All prices do not include shipping costs. Shipping to most areas is $3 for one sheath.
$4.95 flat rate box for up to three sheaths. More than three sheaths will require a shipping quote.
Draw Knives
8"--Greenlee(folding handle)----------$65-2i
6"--Unknown-curved scoop blade-----$35-M213**
6"--Buck Brothers-curved blade-------$70-M222**
Boring Machines
All boring machines have been cleaned, inspected, repaired if needed, and tested to insure that work properly, and have been oiled and are ready to bore holes.
Millers Falls--------$625-D5
Millers Falls--------$675-L5
Snell---------------$205-N5
Boring Machine Bits
All boring machine bits been cleaned, inspected, repaired if needed, sharpened and tested to insure they work properly, and have been oiled and are ready to bore holes.
1 11/16"-60-@$25
1 9/16"---7V-@$30
9/16"------8G-@$25
1 1/4"-----8Q-@$30
2 1/4"-----9M-@$25
1 1/16"---10K-@$25
11/16"----10S-@$25
3"-----------13Q-A-$50
1 1/2"Ajax-15i-1-$30
1 1/2"Ajax-15J-2-$30
1 1/16"Ajax-15M-5-$20
2"-----------15N-1-$35
15/16"------16T-i-$25
2"-----------16U-1A-$40
1"-----------16W-3A-$35
1 1/4"------16Y-B-$35
2"-----------17B-E-$40
2"-----------17C-F-$30
2"-----------17D-G-$40
2"-----------17F-2-$35
9/16"--------17J-$10 (short Jennings style 8 to 8 /12" long)
11/16"-------17K-$10 (short Jennings style 8 to 8 /12" long)
11/16"-------17L-$10 (short Jennings style 8 to 8 /12" long)
1"------------17M-$40
2"------------17O-A-$40
1 3/4"--------17Q-C-$35
1 9/16"-------17R-D-$25
11/16"--------17T-$7-Greenlee single spur power drill bit
13/16"--------17U-$7-Greenlee single spur power drill bit
13/16"--------17V-$7-Greenlee single spur power drill bit
13/16"--------17W-$7-Greenlee single spur power drill bit
13/16"--------17X-$7-Greenlee single spur power drill bit
13/16"--------17Y-$7-Greenlee single spur power drill bit
7/8"-----------17Z-$7-Greenlee single spur power drill bit
7/8"-----------18A-$7-Greenlee single spur power drill bit
7/8"-----------18B-$7-Greenlee single spur power drill bit
7/8"-----------18C-$7-Greenlee single spur power drill bit
2"--------------18D-1-$40
2 1/2"----------18E-2-$45
2"---------------18G-4-$40
1 1/2"----------18H-5-$35
1 5/8"----------18i-A-$25
1 1/2"-----------18L-D-$35
1 1/2"-----------18O-G-$35
1 1/2"-----------18P-H-$35
1 1/2"-----------18Q-i-$35
1 5/8"-----------18R-J-$30
2"----------------18S-A-$35
2"----------------18T-B-$35
1 1/2"------------18U-C-$40
2"----------------18V-D-$40
1 1/2"-----------18W-E-$40
1"----------------18X-F-$35
1 7/16"----------18Y-G-$30
2"----------------19A-2-$40
1 1/2"------------19C-4-$40
1"-----------------19E-6-$40
1 1/2"------------19F-7-$35
Misc.
Spoke shaves, other planes and other tools:
Stanley #26 Jack Plane-----$45--M39
Craftsman #6 plane----------$70--M75
Jim's Slider----------------------$49--M86**
Bit brace----------------------------$15-M129**A
Bit brace----------------------------$15-M129**C
Bit brace----------------------------$12-M130**
Bit brace----------------------------$15-M131**E
Bit brace-----------------------------$7-M134**B
Strop (for sharpening)--------------$10-M135(NEW)
10" Bit Brace------------------------$22-M139
Stanley #102 block plane-------------$20-M143**(as is, not restored)
13/16" Rabbet plane-------------------$30-M147**
1 1/4" Rabbet Plane---------------------$30-M155
Race Knife-------------------------------$50-M178**
T-Handles 4 augers (wooden, 10 on hand)-$2-M187A-L ($2 each)
Stanley 151 blade only---------------------$15-M196**
Stanley 151 blade only---------------------$15-M197**
2 1/2" T-Handle auger---------------------$50-M198
9" Dividers---------------------------------$20-M200**
Adze handle (New #1 grade Hickory)-----$18-M204 (Flame hardened)
Adze handle (New #1 grade Hickory)-----$18-M206 (Flame hardened)
Adze handle (New #1 grade Hickory)-----$18-M207 (Flame hardened)
Adze handle (New #1 grade Hickory)-----$18-M208 (Flame hardened)
4 1/2" Dividers-----------------------------$15-M216**
13 Irwin bits for brace, in a box case-------$75-M217** (#4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, a slotted screw driver and a counter sink reamer)
4" no name caliper------------------------------$10-M227**
Stanley #55 spoke shave------------------------$26-M233**
Wooden Dividers---------------------------------$32-M234**
21" Dividers--------------------------------------$60-M240**
Spoke Shave 151 style-round bottom----------$30-M241** (new)
9" Keen Kutter broad axe head only-------------$65-M243**
Framing square 1"x 1 1/2"----------------------$25-M244**
1 5/8" Wooden rabbet plane--------------------$30-M245**
Wooden round plane-----------------------------$25-M246**
Wooden Vee plane-------------------------------$10-M247** (wrong knife)
Wooden molding plane---------------------------$10-M248** (wrong knife)
Double cut spoke shave--------------------------$25-M250**
Try Square----------------------------------------$15-M251**
Wooden spoke shave-----------------------------$1-M252**
Stanley #45 knife---------------------------------$1-M253**
Set of Audel's Carpenter builder books Vol 1-4---$40-M255**
Set of Audel's Mason books Vol 1-4--------------$40-M256**
Yellowstone stropping compound-----------------$10-M259
Block Plane-----------------------------------------$20-M260**
Bit and Brace Bits:
7/16” Shell Auger-$10-6G
5/8” Shell Auger-$10-6H
11/16” Ships Auger-$15-6i
11/16” Ships Auger-$15-5J
11/16” Ships Auger-$15-5K
11/16” Shell Auger-$15-5L
7/8" Shell Auger-long shank for boring machine-$10-16C**
1"---Shell Auger-long shank for boring machine-$10-16D**
7/8"-Shell Auger-long shank for bit brace--------$10-16E**
11/16"-Shell Auger-long shank for bit brace--------$10-16H**
1 1/8"-Spur Auger-long shank for bit brace--------$10-16K**
3/4"---Spur Auger-long shank for bit brace--------$35-19G**
I hope you will take advantage of this offer, these are nice tools.
If you would like a photo of a tool, just let me know.
All prices do not include shipping costs.
Jim Rogers
The id letter/number system after each tool price is my personal system to keep track of which item is which..
