Here is a list of tools currently available for sale.

These tools have been cleaned, sharpen, honed, and "some" have had handles replaced with new strike end rings.

Tools for sale

Slicks


1 3/4"--Douglas----------$105--2G
3"-------Dover-------------$130--2S
3 5/8"--No Name----------$205--2Y
3"-------Keller&Stocker----$195--3A
3 1/2"--Barton-------------$215--3B
3"------Witherby-----------$225--3C
3"------Beatty--------------$195--3D
3"------PS&Wilcox----------$150--3E

Corner Chisels

1 1/8"--Cook--------$90--2w
7/8"----Unreadable--$60--2y
1 1/4"-PS&Wilcox-----$80--3g
1"-----Hart------------$75--3h
1"-----Unreadable-----$90--3i
1"-----Mix-------------$80--3j
7/8"---Unreadable----$55--3k
1"-----Fulton----------$75--3L
1"-----Hand-forged-----$65--3m


Framing Chisels

1/2"-----Mortising Chisel---------$80--3A
9/16"---Sorby (lock mortise type)--$75--4P
2"-------Pexto-----------------------$105--4R
7/8"-----Pexto-----------------------$70--4X
1"--------Unreadable------------------$50--5O
1 1/2"---Hand Forged-----------------$75--5R
1"-------New Haven--------------------$70--5Y
1 1/2"--Mix-----------------------------$75--6D
2"-------Samson------------------------$90--6F
1"-------Union---------------------------$60--6i
1"-------Stanley Socket bevel edge-----$40--6M-1
1"-------Stanley Socket bevel edge-----$40--6N-2
2"-------PS&Wilcox----------------------$105--6P
2"-------Pexto---------------------------$95--6Q
1"-------Louderbeck&Gilbert------------$85--6S
2"-------PS&W--------------------------$90--6U
1 3/4"--PS&W--------------------------$80--6V
2"-------New Haven--------------------$75--6W
1 15/16"-Crossman--------------------$75--6X
1 1/2" Oine-----------------------------$45--6Y (firmer chisel)
2"-------George Parr-------------------$105--6Z
1"-------Union (New Old Stock)--------$70--7A
1"-------Union (New Old Stock)--------$70--7B
1"-------Union (New Old Stock)--------$70--7C
1"-------Union (New Old Stock)--------$70--7D
1 3/4"--Hart-----------------------------$70-7E
1 1/2"--Underhill-------------------------$70-7F

We also sell new leather sheaths/tip protectors for the above chisels and slicks.

Here is a list of Sheaths currently available for sale.

Sheathes Price List 6-7-08

Plain Leather #102............... $12
Plain Leather #102.5............. $14
Plain Leather #103................ $14
Plain Leather #103.5............. $18
Plain Leather #104................ $18

These are brand new.

I hope you will take advantage of this offer, these are nice leather sheaths.
If you would like to see photo of a sheath, just let me know, and I'll send you a link to the gallery of pictures.
I have created an album and photos are there of all the sheaths.

All prices do not include shipping costs. Shipping to most areas is $3 for one sheath.
$4.95 flat rate box for up to three sheaths. More than three sheaths will require a shipping quote.

Draw Knives

8"--- Mix (folding handle)--------------$70-2E
10"-- Palmer(folding handle)----------$65-2H
8"--- Greenlee--------------------------$65-2i
14"-- Unknown------------------------$50-2J**
8"----Nobles---------------------------$55-2K

Boring Machines

All boring machines have been cleaned, inspected, repaired if needed, and tested to insure that work properly, and have been oiled and are ready to bore holes.

Millers Falls--------$625-J4
Millers Falls--------$650-K4
Snell---------------$165-L4
Snell #788--------$235-O4
Swan--------------$190-P4
Snell---------------$180-Q4
Millers Falls--------$575-S4

Boring Machine Bits

All boring machine bits been cleaned, inspected, repaired if needed, sharpened and tested to insure they work properly, and have been oiled and are ready to bore holes.

1 11/16"-60-@$25
1 9/16"---7V-@$30
1 1/4"-----8D-@$25
9/16"------8G-@$25
1 1/4"-----8Q-@$30
1 3/4"-----9E-@$30
2 1/4"-----9M-@$25
1 15/16"--9N-@$30
1 1/16"---10K-@$25
1 3/8"-----10P-@$30
1 3/8"-----10R-@$25
11/16"----10S-@$25
11/16"--------11U-@$35
5/8"-----------11X-@$35 Swan
1 3/4"---------11Y-@$30
1 3/4"---------11Z-@$30 Ajax
1 1/4"-----------12Q-D-$30
1"----------------12T-G-$30
1"----------------12U-H-$30
1 1/4"------------12W-1-$25
1 15/16"---------12X-2-$25
2"-----------------12Y-3-$40
7/8"---------------12Z-4-$30
1 3/8"--------------13C-7-$30
1 15/16"------ ------13J-14-$25
2"---------------------13L-16-$25
1 1/2"-----------------13O-A-$30
3"---------------------13Q-A-$50
1"---------------------13S-C-$40
1 1/2"-----------------13V-1-$35
1 1/2"-----------------13X-3-$40
1 1/2"------------------14B-$35
1 1/2"------------------14C-$35
1 1/2"-------------------14D-$30
1 1/2"-------------------14E-B-$40
2"------------------------14F-C-$40
1 3/8"-------------------14H-E-$30
1"------------------------14i-F-$35
15/16"-------------------14J-G-$30
1 1/2"------------------14K-H-$40
1 1/2"-(Fine thread)----14N-K-$40
2"-(Fine thread)---------14O-L-$35
1 3/4"-------------------14P-M-$30
1"-----------------------14Q-N-$30
1 1/4" Ajax-------------14R-$25
1 1/2" Ajax--------------14S-$25
1 1/2" Ajax--------------14T-$30
1" Ajax-------------------14U-$30
1 1/2"--------------------14V-1-$35
1 1/4"--------------------14W-2-$25
2"-------------------------14X-3-$30
2"-------------------------14Z-5-$40
2"-------------------------15A-6-$40
1"-------------------------15B-A-$30
2"-------------------------15C-B-$40

Misc.

Spoke shaves, other planes and other tools:


Stanley #26 Jack Plane-----$45--M39
Cabinet Maker vise-----------$30--M69 (no shipping available, pick up only)
Craftsman #6 plane----------$70--M75
Jim's Slider----------------------$49--M86**
Craftsman GC corrugated sole--$65--M90
Block plane-------------------------$30-M115**
Bit brace----------------------------$15-M129**A
Bit brace----------------------------$15-M129**B
Bit brace----------------------------$15-M129**C
Bit brace----------------------------$12-M130**
Bit brace----------------------------$15-M131**D
Bit brace----------------------------$15-M131**E
Strop (for sharpening)--------------$10-M135(NEW)
10" Bit brace-------------------------$22-M139
8" Bit brace---------------------------$15-M140
Stanley #102 block plane-------------$20-M143**(as is, not restored)
1" Rabbet plane------------------------$30-M146**
13/16" Rabbet plane-------------------$30-M147**
Rand Rabbet plane----------------------$43-M150**(NEW)
1 1/4" Rabbet Plane---------------------$30-M155
Race Knife-------------------------------$75-M158**
Plow Plane Irons(set of 8 )--------------$60-M171**
Race Knife-------------------------------$75-M178**
Base for Millers Falls boring machine(Cherry)-$85-M179(NEW)
Base for Millers Falls boring machine(Cherry)-$85-M180(NEW)
Base for Millers Falls boring machine(Walnut)-$90-M181(NEW)
Broad Axe Handles (3 on hand)--------$20-M184ABC ($20 each)(NEW)
Auger bit handle-PS&W-------------------$15-M185
T-Handles 4 augers (wooden, 12 on hand)-$2-M187A-L ($2 each)
Race Knife---------------------------------$75-M188**
Jack Plane #5-Stanley-Baily Pattern-------$70-M194(NEW)
Jack Plane #5-Stanley-Baily Pattern-------$70-M195(NEW)
Stanley 151 blade only---------------------$15-M196**
Stanley 151 blade only---------------------$15-M197**
2 1/2" T-Handle auger---------------------$50-M198
Spoke Shave 151 style-round bottom----$30-M199** (NEW)
9" Dividers---------------------------------$20-M200**
Stanley Plane #45 (with cutters)-----------$185-M202** (11-straight-2-3/16, 1/4, 5/16, 2-7/16, 1/2, 5/8, 3/4, 7/8, 1 1/4") and (7 beading cutters #21, 22, 23, 24, 25, 26, 27)
Adze handle (New #1 grade Hickory)-----$18-M203 (Flame hardened)
Adze handle (New #1 grade Hickory)-----$18-M204 (Flame hardened)
Adze handle (New #1 grade Hickory)-----$18-M205 (Flame hardened)
Adze handle (New #1 grade Hickory)-----$18-M206 (Flame hardened)
Adze handle (New #1 grade Hickory)-----$18-M207 (Flame hardened)
Adze handle (New #1 grade Hickory)-----$18-M208 (Flame hardened)
10" Bit brace Northern King---------------$25-M209
8" Bit brace Stanley-----------------------$17-M210
2" Wooden rabbet plane "Roberts"-------$30-M211
Hickory head mallet-----------------------$25-M212
Set Irwin auger bits for brace-------------$40-M214** (#4, 6, 8, 9, 11, 12, 14, 15, &16)
Small Caliper-------------------------------$15-M215**
4 1/2" Dividers-----------------------------$15-M216**
13 Irwin bits for brace, in a box case-------$84-M217** (#4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, a slotted screw driver and a counter sink reamer)
Stanley #10 Carriage maker rabbet plane--$195-M218
Spoke shave 151 style-flat bottom---------$30-M219**

Bit and Brace Bits:
7/16” Shell Auger-$10-6G; 5/8” Shell Auger-$10-6H, 11/16” Ships Auger-$15-6i; 11/16” Ships Auger-$15-5J; 11/16” Ships Auger-$15-5K; 11/16” Shell Auger-$15-5L

Bit and Brace Bits; Not cleaned & Un-sharpened bits-all $1 each; sold as is:
¼” Pointed-5P; 3/8” Jennings-5R; 7/16” Irwin-5T; ½” Irwin-5U; ½” Irwin-5W; 9/16” Jennings-5X; 9/16” Jennings-5y; 9/16” Jennings-5Z; 5/8” Jennings-6A; 5/8” Jennings-6B; 5/8” Irwin-6D

I hope you will take advantage of this offer, these are nice tools.
If you would to see a photo of a tool, just let me know. I have created an album and some if not all of the tools have photos there. I can email you a link to the gallery where the pictures are.
All prices do not include shipping costs.

Jim Rogers

The id letter/number system after each tool price is my personal system to keep track of which item is which..


Whatever you do, have fun doing it!