Posted By: Wayne
FS: Mafell ZK115 Skew Notch/Tenon/Lap Joint Cutter - 08/17/14 06:28 PM
As NEW, Mafell ZK115L Skew Notch/Tenon/Lap Joint Cutter
Item is used, but for only two projects! Pictures show actual machine and condition. Note the tool is 230 volt.
REPLACEMENT COST: $6120 USF
http://www.timberwolftools.com/tools/mafell/MAF-ZK115Ec.html
Tool also comes with replacement knives
Watch item in action
https://www.youtube.com/watch?v=t5HFqpUh1pA
Open to offers/trades
Until now, making notch cuts was a trial-and-error process. The ZK 115 puts an end to this: simply score the notch and vertical cut, set the cut indicator, notch depth and angle and mortising can begin. It couldn't be quicker or easier. Incidentally, with the ZK 115 L, you have the worlds lightest skew notch, lap-joint and tenon cutting machine in your hand. The ZK 115 K has a 3000 watt (4 hp) high-powered motor for extreme cutting performance. Due to the built-in friction clutch, the ZK 115 L starts up smoothly and cuts through wood as if through butter. The guide rails available as optional accessories can be used with all other MAFELL carpentry machines.
Tilt range 0-60°
Stable height adjustment
Special machine for all notching and facing tasks.
Fast, precise adjustment no test cutting necessary considerable time-saving.
All-round protective cover for optimum user protection.
Specification
Depth of lap-joint 0 - 83,5mm
Tilt range 0 - 60
Nominal no-load speed 4050 1/min
Cutting speed 31,8 m/s
Nominal input 3000W
Weight (with standard cutter head) 18,4kg
Cutting tool - as standard 150 x 115mm
Universal-motor 230V / 50Hz
Item is used, but for only two projects! Pictures show actual machine and condition. Note the tool is 230 volt.
REPLACEMENT COST: $6120 USF
http://www.timberwolftools.com/tools/mafell/MAF-ZK115Ec.html
Tool also comes with replacement knives
Watch item in action
https://www.youtube.com/watch?v=t5HFqpUh1pA
Open to offers/trades
Until now, making notch cuts was a trial-and-error process. The ZK 115 puts an end to this: simply score the notch and vertical cut, set the cut indicator, notch depth and angle and mortising can begin. It couldn't be quicker or easier. Incidentally, with the ZK 115 L, you have the worlds lightest skew notch, lap-joint and tenon cutting machine in your hand. The ZK 115 K has a 3000 watt (4 hp) high-powered motor for extreme cutting performance. Due to the built-in friction clutch, the ZK 115 L starts up smoothly and cuts through wood as if through butter. The guide rails available as optional accessories can be used with all other MAFELL carpentry machines.
Tilt range 0-60°
Stable height adjustment
Special machine for all notching and facing tasks.
Fast, precise adjustment no test cutting necessary considerable time-saving.
All-round protective cover for optimum user protection.
Specification
Depth of lap-joint 0 - 83,5mm
Tilt range 0 - 60
Nominal no-load speed 4050 1/min
Cutting speed 31,8 m/s
Nominal input 3000W
Weight (with standard cutter head) 18,4kg
Cutting tool - as standard 150 x 115mm
Universal-motor 230V / 50Hz