|
Framing with Utility Poles
#7862
05/27/99 07:45 PM
|
Joined: May 1999
Posts: 1
dbowser
OP
Member
|
OP
Member
Joined: May 1999
Posts: 1 |
I was wondering if anyone had any info. about framing/building with utility poles?? I have an almost unlimited supply of utility poles and would very much like to talk to someone who has "done it before" or that knows where I might get some information.
Thanks, Doug Bowser
|
|
|
Re: Framing with Utility Poles
#7863
06/09/99 12:49 PM
|
Joined: Jun 1999
Posts: 4
Jeff Jenkins
Member
|
Member
Joined: Jun 1999
Posts: 4 |
I can't help you with framing with utility poles, but I do know that way back when they used to 'pave' streets with tree trunks layed across the road. Talk about the ultimate rumble strip!
I suppose you could do your driveway this way, but you'd better start stocking up on shocks for your truck.
Good luck.
|
|
|
Re: Framing with Utility Poles
#7864
06/20/99 04:38 AM
|
Joined: Jun 1999
Posts: 6
Bill Boquist
Member
|
Member
Joined: Jun 1999
Posts: 6 |
I once obtained a utility pole as they were being replaced with new ones near my home. My intent was to use it to try my hand at hewing. The chunk of pole I got was only about 12' long, and had been exposed to the weather for decades. I stored it in my garage for a couple of weeks before I got around to taking an axe to it. When I went out to the garage, I was surprised to find that the whole building really reeked of creosote. This, in spite of the fact that the garage involved was not a "tight" building and there was only one piece of weathered material in it. I would imagine that it would be hard to stomach the strength of that odor in a house framed with creosoted material. Of course, if you are talking about untreated poles, none of the above would apply.
|
|
|
Re: Framing with Utility Poles
#7865
06/21/99 11:26 AM
|
Joined: Feb 1999
Posts: 116
Rudy R Christian
Moderator
|
Moderator
Joined: Feb 1999
Posts: 116 |
Doug,
We had the opportunity to frame a boathouse which used utility poles for the pilings. They continued up to the wall plates and ties, which meant they were also the posts on the boat level.
Aside from their behind round, and no two having the same diameter, they were very irritating to cut joinery in. Especially on hot dys the sawdust created nasty rashes.
I would recommend using them for road building instead.
|
|
|
Re: Framing with Utility Poles
#7866
07/07/99 10:38 PM
|
Joined: Jul 1999
Posts: 2
Scott
Member
|
Member
Joined: Jul 1999
Posts: 2 |
Hi, I've used poles to sit a conventionally framed house on. The site was "very" steep so we sat the home on poles with steel cross bracing, it works excelent on those dificult sites woth a lot of rock as well.
|
|
|
Re: Framing with Utility Poles
#7867
09/21/99 02:30 AM
|
Joined: Sep 1999
Posts: 1
jimk
Member
|
Member
Joined: Sep 1999
Posts: 1 |
What about pole barns and similar structures? You can use treated wood indoors but not if it was treated with creosote. On other types you simply need to paint the wood, use shellac or enclose it within a wood enclosure.
Granted, this isn't timber framing but I totally agree with the other posts regarding the unsuitability for such. However it is dirt simple and I suppose the oldest framing method.
Since most utility poles are treated using creosote you would be limited to storage structures that are well ventilated and not inhabited by humans! An example would be a storage shed for farm machinery.
|
|
|
|
|
|
|