|
Help choosing a suitable (bubble) level?
#9066
03/21/06 12:04 AM
|
Joined: Sep 2002
Posts: 10
Chance
OP
Member
|
OP
Member
Joined: Sep 2002
Posts: 10 |
I'm trying to choose a replacement for my 48" aluminum level( Mastercraft brand eh!) It was OK for building a deck, etc but it has issues. I'm thinking a 60 or 72 inch might be useful for timber framing as well as foundation and general construction. What would the timber framers out there recommend as to length and brand preferences? Thanks in advance
Ken
|
|
|
Re: Help choosing a suitable (bubble) level?
#9067
03/30/06 02:03 AM
|
Joined: Mar 2002
Posts: 1,198
northern hewer
Member
|
Member
Joined: Mar 2002
Posts: 1,198 |
Hi chance:
Just an observation, there is nothing wrong with a good quality 48 inch level it has many good uses. The old timberframers used only solid wood levels of 30inches, stanley was one of the earliest to produce them, and can still be picked up and put in good order. My advice from experience is to obtain a good quality brass plumb bob, and use it to plumb your frames. just hang it where ever you can and it will give you an unmistakably true vertical line that might be impossible using a level on a sawn or hewn wood surface. NH
|
|
|
Re: Help choosing a suitable (bubble) level?
#9068
03/30/06 12:44 PM
|
Joined: Nov 2003
Posts: 1,124
Mark Davidson
Member
|
Member
Joined: Nov 2003
Posts: 1,124 |
the plumb bob is an awesome tool, never needs to be checked for accuracy, plus it helps to develop your eyes for you. AND, I would say that mastercraft aluminum levels are as good as you need, probably better than you need if you work carefully. A six foot level or straightedge would definitely be an asset for TF layout.
|
|
|
Re: Help choosing a suitable (bubble) level?
#9069
03/30/06 09:06 PM
|
Joined: Sep 2002
Posts: 10
Chance
OP
Member
|
OP
Member
Joined: Sep 2002
Posts: 10 |
Thanks to Northern Hewer and Mark Davidson for responses to my questions. I have a couple of plumb bobs which as you say are always useful. As far as the level goes, I suspect I went a bit overboard, but I went with German engineering and bought a 59" Stabila set from KMS tools(no affiliation) . I'm sure it will be useful for timber framing as well as foundation work and interior work(doors, cabinets etc. The set includes a 16" bonus?? level. Thanks again, If I can't build straight, plumb and level with the stabila, boy will I be red faced.
|
|
|
Re: Help choosing a suitable (bubble) level?
#9070
04/08/06 01:59 PM
|
Joined: Apr 2006
Posts: 26
Dennis Ball
Member
|
Member
Joined: Apr 2006
Posts: 26 |
Stabila 8 foot. A little pricey at $165, but well worth it.
Frame On!
|
|
|
Re: Help choosing a suitable (bubble) level?
#9071
04/09/06 12:00 AM
|
Joined: Jun 2002
Posts: 136
John Buday
Member
|
Member
Joined: Jun 2002
Posts: 136 |
I had been a long time plumb bob fan but I invested in a Stabila extendable level (6'-10')
Best thing since sliced bread
|
|
|
Re: Help choosing a suitable (bubble) level?
#9072
04/10/06 02:07 PM
|
Joined: Dec 1999
Posts: 24
Randy Churchill
Member
|
Member
Joined: Dec 1999
Posts: 24 |
The lasers are now pretty good as well. Have used them in lots more ways than originally envisioned with good results. Just an expensive plumb bob, but can be set up quick and run easily. Right angle features are nice.
|
|
|
|
|
|
|