|
Post Anchors
#21000
08/28/09 02:03 AM
|
Joined: May 2009
Posts: 14
johninnh
OP
Member
|
OP
Member
Joined: May 2009
Posts: 14 |
Greetings,
I need to anchor posts for an open frame and was wondering if anyone has recommendations? 7" x 7" posts.
Thanks,
John
|
|
|
Re: Post Anchors
[Re: johninnh]
#21002
08/28/09 03:01 AM
|
Joined: Mar 2002
Posts: 1,687
Jim Rogers
Member
|
Member
Joined: Mar 2002
Posts: 1,687 |
There are lots of things you can use, but everyone will ask you: "what's the load they will be carrying?" And you need to have something that will support that load.
Also, being an open frame you'll need something with some "hold down" strength as well.....
Jim Rogers
Whatever you do, have fun doing it!
|
|
|
Re: Post Anchors
[Re: johninnh]
#21006
08/28/09 02:50 PM
|
Joined: May 2009
Posts: 14
johninnh
OP
Member
|
OP
Member
Joined: May 2009
Posts: 14 |
Thanks Jim,
I agree with the hold down strength. I was thinking of 10" footings 4 feet deep with some type of anchor imbedded in it.
As to load, the frame is comprised of 950 board feet of pine not including the metal roof (14' x 16')
John
|
|
|
Re: Post Anchors
[Re: johninnh]
#21033
08/31/09 02:18 AM
|
Joined: Jan 2008
Posts: 918
bmike
Member
|
Member
Joined: Jan 2008
Posts: 918 |
... also consider keeping the post off the masonry or concrete to prevent moisture wicking... some anchors do this by design, others do not. a piece of stainless works, or scrap of flashing, or abs plastic (the hard black type) etc.
Last edited by bmike; 08/31/09 02:19 AM.
|
|
|
Re: Post Anchors
[Re: johninnh]
#21215
09/22/09 10:13 PM
|
Joined: Sep 2009
Posts: 3
JeffL
Member
|
Member
Joined: Sep 2009
Posts: 3 |
Hi John, I am no expert, however, I am doing a project now and have done some research. 2 main companies make these types of post bases. Simpson Strong Tie and USP. Below is the link to the USP Catalog for bases: http://www.uspconnectors.com/pdf-full-line-2009/Categories/capsbases55.pdfI used the PAU88R (These are for 8x8 Rough sawn post) EXTREMELY Heavy Duty. Imbed 1/2 Foundation bolts (Look like a L) into concreete. A bit pricey ... $60 buck per, but I only want to do in once. Jeff L
|
|
|
Re: Post Anchors
[Re: JeffL]
#21216
09/22/09 11:55 PM
|
Joined: Jan 2008
Posts: 918
bmike
Member
|
Member
Joined: Jan 2008
Posts: 918 |
in my eye all of the simpson and similar bases / connectors are fugly.
if the connector is going to be visible have a local metal shop fab up something. plenty of options floating around out there for design ideas.
|
|
|
Re: Post Anchors
[Re: JeffL]
#21219
09/23/09 01:35 AM
|
Joined: May 2009
Posts: 14
johninnh
OP
Member
|
OP
Member
Joined: May 2009
Posts: 14 |
Thanks Jeff,
I was beginning to feel as though I had posted a personal question. So little feedback.
John
|
|
|
Re: Post Anchors
[Re: johninnh]
#21240
09/26/09 04:55 PM
|
Joined: Dec 2004
Posts: 48
Dave Petrina
Member
|
Member
Joined: Dec 2004
Posts: 48 |
We use Timberlinx A475 to anchor all our 4-sided exposed posts. They result in a hidden connection (other than a 1" plugged hole) and are pretty economical compared to a custom knife plate connection - about $35 per connection. I like the fact that we get to drill and epoxy them so we're not relying on the 'accuracy' of anchor placement by the concrete contractor.
|
|
|
|
|
|
|