See new list below.....

(Updated 3/30/07)
Here is a list of tools currently available for sale.
These tools have been cleaned, sharpen, honed, and "some" have had handles replaced with new strike end rings.

Tools for sale

Slicks

2"-----(unreadable)----$ 95-w
3"-------Douglas-----------$165-2C
3"-------Swan-------------$175-2D
3"-------Greenlee---------$145-2E
1 3/4"--Douglas-----------$105-2G
3"-------Underhill----------$150-2H

Corner Chisels

3/4"----Mix---------------$65-2L
1"------noname----------$65-2p

Framing Chisels

2"-------No name---------------$60--2Q
1"-------Union------------------$65--2T
1/2"-----Mortising Chisel---------$80--3A
2"-------PS&Wilcox--------------$70--3B
3/4"-----Winsted----------------$50--3C*
1 3/4"---Page-------------------$65--3E*
1 15/16"---WWByran------------$65--3F*
2 1/8"---Galtz--------------------$90--3I
2"-------Swan---------------------$60--3L
2"-------Parr----------------------$65--3N
2"-------Witherby-----------------$65--3O
2"-------Galtz---------------------$75--3P
1 1/2"---Hartford tool------------$65--3Q
1 1/2"---Unreadable---------------$50--3U

Draw Knives

10"--HSCH Austria----------------$50--I

Boring Machine Bits

All boring machine bits been cleaned, inspected, repaired if needed, sharpened and tested to insure the work properly, and have been oiled and are ready to bore holes.

@$20 ea: 1 1/8"-2Q, 1 1/4"-6S
@$25 ea: 1 15/16"-5H, 1 13/16"-60, 1 1/4"-7E, 1 1/2"-7F, 1 1/4"-7G, 1 1/2"-7H 1 1/2"-7M, 1 1/2"-7N, 2"8C, 1 1/4"-8C, 1 1/4"-8D, 9/16"-8F, 9/16"-8G
@$30 ea: 2"-6F, 1 3/4"-6P, 1 1/2"-7L, 2"-7U, 1 9/16"-7V, 1 3/4"-7Y, 1 1/2"-8A
@$35 ea: 2"-7C, 1 1/2"-7i, 2"-7R, 2"-7S, 3/4"-7W, 3/4"-7X, 1 1/2"-7Z, 2"-8B
@$40 ea: 3"-6T, 1 1/2"-7O, 1 1/2"-7P

Special 11 Bit set 1/4" to 1" in carrier (all have 1/2" shanks) with adapter for bit brace-$75-M51

Boring Machines

All boring machines have been cleaned, inspected, repaired if needed, and tested to insure the work properly, and have been oiled and are ready to bore holes.

1872 Phillips------$210-Q2
Boss-adjustable--$320-X2
Swan-------------$205-Z2
Boss-adjustable--$350-A3

Misc.

Spoke shaves and other planes:
1 5/8" Rabbit Plane--------$30--M31
Stanley 151---------------$30--M34
Stanley 51-----------------$25--M35
Stanley 61-----------------$20--M36
Stanley/Bailey plane--------$40--M38
Stanley #26 Jack Plane-----$45--M39
Stanley/Bailey plane #29---$50--M40
1 3/4" Rabbit plane---------$40--M41
12" Dividers-----------------$24--M43**
Stanley #51 spoke shave---$25--M44**
Plow Plane-----------------$105--M46
Stanley #151 Spoke shave--$32--M52
1 1/2" Rabbit Plane-----------$30--M53
Sharpening Strops-----------$10--M54
Stanley 151 Spoke shave-----$28--M56

Bit and Brace Bits:
7/16” Shell Auger-$10-6G; 5/8” Shell Auger-$10-6H, 11/16” Ships Auger-$15-6i; 11/16” Ships Auger-$15-5J; 11/16” Ships Auger-$15-5K; 11/16” Shell Auger-$15-5L

Bit and Brace Bits; Not cleaned & Un-sharpened bits-all $1 each; sold as is:
¼” Pointed-5P; 3/8” Jennings-5R; 7/16” Irwin-5T; ½” Irwin-5U; ½” Irwin-5W; 9/16” Jennings-5X; 9/16” Jennings-5y; 9/16” Jennings-5Z; 5/8” Jennings-6A; 5/8” Jennings-6B; 5/8” Irwin-6D

I hope you will take advantage of this offer, these are nice tools.
If you would like a photo of a tool, and your email program will accept pictures, I can send you one, just let me know. I have created an album and some of the tools have photos there. Here is a link to the album in my gallery:
Click here for link. Larger shots have been taken of each tool and they are available to be emailed to you.
All prices do not include shipping costs.

Jim Rogers

Hello Jim,

Curious if your boring machine bits are double-spurred, if so I'd be interested in a 2" and a
1 1/4". Just bought a boring machine up in exeter, NH I had my eye on for awhile and can't wait to try it out. I've also been roped into a demonstration in two weeks so I'd like to make this transaction this week if possible. Also curious, is it worth getting a bit just under 2" for a 2" pocket so as not to assail the score line or should I just act like a craftsman? Thanks, jeremy

Hello Jim. I would like to see pictures of the two adzes as well as the Millers falls boring machine if that is possible. Thanks tb

"Personal tool sales OK, of course!"
My interpretation of this includes people who trade old tools as a hobby, like Jim.
Jim provides a service to framers (and collectors) who want to buy a solid old tool ready to use.
I am sure he does this more for the enjoyment (hobby) than the cash (commercial).
Joel, am I right here?

Pretty much, ok.

We're walking a fine line here, and I am about to set up seperate forums for 'for sale' and 'wanted to buy', just to make it all flow more clearly.

The Guild is not interested in providing advertising space for commercial vendors within these bulletin boards.

We are comfortable with one-time private placements and small-scale used tool stuff, though it will always remain a judgement call.

The tools for sale list has just been updated.

This is a test to see if I can edit this post tomorrow.....