materials - Timber Frame Forums

Register Log In Timber Framers Guild Forums General Forum Questions materials

Print Thread

Rate Thread

materials #11458 05/12/07 12:00 PM
Joined: May 2007 Posts: 20 B bosshaus OP Member
OP bosshaus Member B Joined: May 2007 Posts: 20	Anyone have any experience working with different materials in the same frame? Is spruce an acceptable material, and could I build a frame using spruce and pine? thanks nate

Re: materials [Re: bosshaus] #11460 05/12/07 12:12 PM
Joined: May 2002 Posts: 447 Center Barnstead NH Will Truax Member
Will Truax Member Joined: May 2002 Posts: 447 Center Barnstead NH	Yes, yes and yes. Mix it up "We build too many walls and not enough bridges" - Isaac Newton http://bridgewright.wordpress.com/

Re: materials [Re: Will Truax] #11461 05/12/07 12:38 PM
Joined: May 2007 Posts: 20 B bosshaus OP Member
OP bosshaus Member B Joined: May 2007 Posts: 20	Excellent. I was worried that someone might tell me that it was a poor idea. Thanks! nat

Re: materials [Re: ] #11464 05/12/07 07:03 PM
Joined: May 2007 Posts: 20 B bosshaus OP Member
OP bosshaus Member B Joined: May 2007 Posts: 20	Mix it up I shall.

Moderated by Jim Rogers, mdfinc

Hop To

Newest Members

Bradyhas1, cpgoody, James_Fargeaux, HFT, Wrongthinker
5137 Registered Users

show/hide columns on this page

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)

PHP: 5.4.45 Page Time: 0.026s Queries: 16 (0.009s) Memory: 3.1254 MB (Peak: 3.5814 MB) Data Comp: Off Server Time: 2024-04-26 14:18:48 UTC
Valid HTML 5 and Valid CSS