I gotta pay off foreclosure taxes - Mafell tools
#19473
05/02/09 12:44 AM
|
Joined: Oct 2007
Posts: 112
Waccabuc
OP
Member
|
OP
Member
Joined: Oct 2007
Posts: 112 |
Same tools, lower prices. I'm $4thousand short of cash-in-hand to pay property taxes to prevent imminent foreclosure on my TF home and land. Tools work great, rock bottom prices. I'm also trying to sell a Moosehead, a Leopard rug, some old Volvos, a 20" Davis & Wells Bandsaw w 5 HP 3ph, a 12" Fay & Egan Joiner w 5 HP 1ph, a Felder BF41 Woodworking System and tooling with three 3HP 3ph motors and a phase converter, a 150 yr old Mahjong table & set of 4 chairs made of "Chinese Rosewood" which I bought from my Tai Chi teacher yrs ago so she could have eye surgery. It has beautiful joinery and work into it. A Welsh pony mare, 11 yrs old, 14hands 1", dappled grey and green $500. A '92 Dodge Grand Caravan runs great, Lots of ash logs 10" -36", some big fat 30"- 38" oak logs, some 4/4 & 6/4" cherry and 4/4" walnut lumber and flitches. A Stihl 090 saw with ripping chains & fences and 3'& 5' bars etc. Some boat lumber. I can't take it ALL with me.... I gotta find a buyer for the house and land and move away from this too high cost suburbia. It's getting too crowded with "New People". Gotta get back to doing the things I love, rather than trying to cover my back and cover my ass, and pay too much insurance and taxes and lawyers. I'm still healthy - don't want to create medical bills too. Am I sounding like Derek on one of his rants? No, I can't touch him yet! Steve
Mafell tools:
Circ. saw 14" MKS125 120v 1ph 50/60hz, w rip fence,60degree tilt. US$1650. Planer 11" ZH280E 230v 1ph 50/60hz. w extra blades. US$2650. Bandsaw 12" Z3L 230v 1ph 50/60hz w 16 extra bands. US$2900. Guide #037037 - two 1.5m lengths & connector, (plus a third 1.5m guide pc & 2nd connector = 4.5 m/15'). Use w circ saw or band saw, or as a straight edge guide for almost any tool. US$360. All maintained in good working order. I have owner's manuals & orig receipts.
I’m selling a Makita Chain mortiser on a separate post. Also available: 2 female Australian Shepherd puppies see website below
Steve Miller Tea House Design Frog Hollow PO Box 99 Waccabuc NY 10597 914 763-3078home 914 539-1352 cell teahousedesign at verizon dot net w3dot karriaussies dot com I’m in NYC Metro area, 20 minutes from I-84 Danbury CT
Shine on!
|
|
|
Re: I gotta pay off foreclosure taxes - Mafell tools
[Re: ]
#19475
05/02/09 02:37 AM
|
Joined: Mar 2008
Posts: 570
OurBarns1
Member
|
Member
Joined: Mar 2008
Posts: 570 |
Best of luck Steve. That's quite an arsenal of equipment, wood and antiques.
Don Perkins Member, TFG
to know the trees...
|
|
|
Re: I gotta pay off foreclosure taxes - Mafell tools
[Re: ]
#19476
05/02/09 03:13 AM
|
Joined: Oct 2007
Posts: 112
Waccabuc
OP
Member
|
OP
Member
Joined: Oct 2007
Posts: 112 |
Hey Thanks Derek. Maybe we'll meet sometime soon on the road.
Shine on!
|
|
|
Re: I gotta pay off foreclosure taxes - Mafell tools
[Re: OurBarns1]
#19482
05/03/09 02:23 AM
|
Joined: Oct 2007
Posts: 112
Waccabuc
OP
Member
|
OP
Member
Joined: Oct 2007
Posts: 112 |
Thanks Don. I enjoy your posts and your wealth of knowledge, plus the talk-arounds you guys from Maine plus Will Truax get into on this forum. Steve
Shine on!
|
|
|
Re: I gotta pay off foreclosure taxes - Mafell tools
[Re: Waccabuc]
#19487
05/03/09 08:49 PM
|
Joined: Mar 2008
Posts: 570
OurBarns1
Member
|
Member
Joined: Mar 2008
Posts: 570 |
Thanks Steve.
I enjoy the forum and meeting those who have similar interests. Maybe something will come of these chats we've been a part of. We're creating an online community...
In the meantime, keep the faith, and keep contributing to the forum. Just because we're not raising frames doesn't mean we've nothing to say and or share.
Connecting w/ folks usually brings opportunity.
Don Perkins Member, TFG
to know the trees...
|
|
|
Re: I gotta pay off foreclosure taxes - Mafell tools
[Re: OurBarns1]
#19493
05/05/09 12:57 AM
|
Joined: May 2004
Posts: 286
Raphael D. Swift
Member
|
Member
Joined: May 2004
Posts: 286 |
What do you want for the 090 and ripping gear? Are the oak logs white or red?
Raphael D. Swift DBA: DreamScapes
|
|
|
Re: I gotta pay off foreclosure taxes - Mafell tools
[Re: Waccabuc]
#19496
05/05/09 02:40 PM
|
Joined: Apr 2009
Posts: 8
4565
Member
|
Member
Joined: Apr 2009
Posts: 8 |
Hello, Steve.
I would like more info. on the 20" Davis@Wells bandsaw. -year -model # -are all components original? -does it have a fence? -wt.
Also, the 11"ZH280E planer. -year?
I sent a more detailed email to your Tea House Designs address.
I hope that your situation turns around smoothly and quickly.
Thank you. Bob Grier
|
|
|
Re: I gotta pay off foreclosure taxes - Mafell tools
[Re: Raphael D. Swift]
#19498
05/05/09 02:56 PM
|
Joined: Oct 2007
Posts: 112
Waccabuc
OP
Member
|
OP
Member
Joined: Oct 2007
Posts: 112 |
Easier to talk by phone. 090 AV has very low hours, excellent working condition. Recent new clutch, I just rebuilt the carb, had saw serviced and checked by Brady's Power Equip in Stormville NY. I have .404 chains, bars and sprocket on it and on my 051AV. The 090 is a bull - 136cc, lots of torque, hard to slow it down, it just keeps cutting. It's loud, I always wear hearing protection. They dont make em like this any more. It's great for milling. It's heavy for felling but good to have all that power when you're taking down really big ones and you want that final hinge cut to go quick so it drops in the right direction. For buzzing thru repetitive crosscuts I use it on 28" - 30" and bigger. Smaller I'll use the 051AV then down to the 020AV. The 5' bar is a Granberg w a handle on the end for a second man. I have an Alaska Mill fence, plus I have a 2 section (7' & 11' = 18') HD alum track to run on for straight, accurate, parallel rips. I also have a rachet puller with a yoke to attach to the AK Mill & saw to pull it thru the log. Makes it easier than pushing. I saw two 090s on Ebay for $2500 and higher. I'm thinking of pricing everything for $2250. I'll take some pics later today. Red and white oak logs. Steve 914 763-3078 h 914 539-1352 c
Shine on!
|
|
|
Re: I gotta pay off foreclosure taxes - Mafell tools
[Re: Waccabuc]
#19726
05/15/09 05:00 AM
|
Joined: May 2004
Posts: 286
Raphael D. Swift
Member
|
Member
Joined: May 2004
Posts: 286 |
If I hadn't just dumped $2500 on water filtration I'd be seriously interested in the 090 et. al. as it is I've passed the info on to a local sawyer who was looking for rig to slab 44" black cherry.
I imagine that 090 must be a beast, even with a ripping chain my 066 can make a back cut faster than I'd have ever imagined.
Raphael D. Swift DBA: DreamScapes
|
|
|
Re: I gotta pay off foreclosure taxes - Mafell tools
[Re: Raphael D. Swift]
#19730
05/15/09 01:35 PM
|
Joined: Oct 2007
Posts: 112
Waccabuc
OP
Member
|
OP
Member
Joined: Oct 2007
Posts: 112 |
Thanks for passing my info on re the Stihl 090 AV and milling attachments. Yes it's a powerful, smooth, reliable, well trained "beast" - 136cc.
Wow, that's a lot of $ to drop on water filtration. What was/is so wrong with your water source that it needs such remediation? Have you seen the movie "FLOW" (For Love Of Water)? I recommend it highly - deals with potable water as a commonwealth resource etc, on national and international scale as well as very local. Includes Macosta County Mich, where my some of my family live. Nestles under the name of "Cold Mountain" is stealing and selling for profit 300,000+ gallons of water/day from the aquifer. They made a "sweet deal" w state politicians for tax breaks and permits etc. One of the individual serving plastic water bottles that I was given at Northfield/Mt Herman "Out of the Ashes" barn raising I kept in my car or truck for 4 yrs, refilling it daily from my tap. It got run over, so finally went to recycling. The water at the tap inside our framing building/art studio classroom was cool, sweet and potable - didn't need bottled water delivered morning and afternoon by 2 students on a motorized golf cart.. Hopefully habits have changed there since. I did enjoy the project and the students and the T Framers and the spirit of the event. My favorite rendezvous are Habitat and Gould Farm. I hope to get to Brasstown NC and Knoxville TN in 2 -3 weeks. Selling some stuff first. I'm working at a fast and steady pace, occasionally looking over my shoulder, mostly looking at projects at hand and looking forward. Steve 914 763-3078 h 914 539-1352 c p.s. that's a very rare and special cherry. I'm using cherry flitches from a 40"+ tree on a cabinet job I'm doing now.
Shine on!
|
|
|
|
|