Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: Axe handle question [Re: TIMBEAL] #23453 04/24/10 08:15 PM
Joined: Jan 2008
Posts: 918
B
bmike Offline
Member
Offline
Member
B
Joined: Jan 2008
Posts: 918
Tim - I can't imagine using used motor oil on anything I might handle or use in the garden... Sounds toxic to start with. I can't believe millions of cycles at high heat does it any good... But YMMV.





Mike Beganyi Design and Consulting, LLC.
www.mikebeganyi.com
Re: Axe handle question [Re: bmike] #23454 04/25/10 12:51 AM
Joined: Dec 2007
Posts: 1,882
T
TIMBEAL Offline
Member
Offline
Member
T
Joined: Dec 2007
Posts: 1,882
That advice comes from Scott and Helen Nearing, while living the good life. Just though I would contribute to a previous thread. I do not oil my shovel handles, btw, Scott did though, and lived into his 90's. I wonder how old his shovels were. I have lost more shovel than I care to recall. I used to do a lot of mechanic work, snacking along the way with dirty hands, so I probably have had an oil sandwich. Brake dust was the worst, not to mention gasoline running down my arms while changing a fuel line or tank. I am glad it is not still my primary line of work. Welding is another place where it is possible to breath in some nasty stuff.

How about nine lives? I wonder how many I have used?

Tim


Re: Axe handle question [Re: TIMBEAL] #23456 04/25/10 04:51 PM
Joined: Feb 2006
Posts: 718
Dave Shepard Offline
Member
Offline
Member
Joined: Feb 2006
Posts: 718
Scott lived 100 years and 18 days, stopped eating intentionally in the end.


Member, Timber Framers Guild
Re: Axe handle question [Re: Dave Shepard] #23457 04/26/10 12:20 AM
Joined: Dec 2007
Posts: 1,882
T
TIMBEAL Offline
Member
Offline
Member
T
Joined: Dec 2007
Posts: 1,882
I was not sure of his age. He said when he could no longer bring in the fire wood then his time was up.

Tim

Re: Axe handle question [Re: TIMBEAL] #23491 05/03/10 10:44 PM
Joined: Nov 2003
Posts: 1,124
M
Mark Davidson Offline
Member
Offline
Member
M
Joined: Nov 2003
Posts: 1,124
I'm with Tim, oil the end grain but leave the handle raw.

Re: Axe handle question [Re: Mark Davidson] #23494 05/04/10 03:23 AM
Joined: Jan 2007
Posts: 603
brad_bb Offline OP
Member
OP Offline
Member
Joined: Jan 2007
Posts: 603
Tim, Nitrile gloves and Boraxo soap really help with mechanic work.

Re: Axe handle question [Re: brad_bb] #23496 05/04/10 10:41 AM
Joined: Dec 2007
Posts: 1,882
T
TIMBEAL Offline
Member
Offline
Member
T
Joined: Dec 2007
Posts: 1,882
Brad, back in the 1980's we didn't use them. I remember seeing the first fellow use them and thought what a "girl". I use the nitrile gloves now. I dust my hands with baby power and they come on and off easily, I re use then until they are busted.

I find handles will oil up naturally with use, the more you use it the better it gets. Sure a first light coat of something will be ok, I would not fuss over it. I have a mix of stuff on mine, pine pitch is the most prevalent, nothing applied on purpose.

Tim

Re: Axe handle question [Re: brad_bb] #23604 05/19/10 03:11 PM
Joined: May 2010
Posts: 1
S
SteveMeyer Offline
Member
Offline
Member
S
Joined: May 2010
Posts: 1
Brad, if your handle is as dry as it sounds, it will absorb quite a lot of oil and not become sticky. You could use linseed oil mixed with mineral spirits 50/50 and apply it until it doesn't sink in anymore. Rub it with climbers chalk or fine dirt (maybe even cat litter) to dry the handle to the touch if it gets too sticky feeling. As far as the target is concerned the guys will probably give it to you if you tell them you need an axe target.A twelve pack at the most. cool

Re: Axe handle question [Re: SteveMeyer] #23683 06/01/10 12:39 PM
Joined: May 2007
Posts: 167
T
toivo Offline
Member
Offline
Member
T
Joined: May 2007
Posts: 167
linseed oil should do fine, as others have said. if it feels slippery some balsom or pine sap rubbed in right at the end of the handle can give a bit of control (if it's the gransfor handle without a poll).

i wonder about the oak too. i've had good success with balsom poplar, both upright and end grain. it soaks up the axe really nice, and makes a pleasant sound.

on the axe handle tip- discovery--> i've always wanted to try repairing a broken handle with a splice- just tried this and it seems to have worked so far. will post pics.

Page 2 of 2 1 2

Moderated by  Jim Rogers, mdfinc 

Newest Members
HFT, Wrongthinker, kaymaxi, RLTJohn, fendrishi
5134 Registered Users
Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 5.4.45 Page Time: 0.025s Queries: 16 (0.006s) Memory: 3.2051 MB (Peak: 3.3984 MB) Data Comp: Off Server Time: 2024-03-28 20:12:07 UTC
Valid HTML 5 and Valid CSS