Timber Framing hand tools for sale list 3-16-12
#28303
03/16/12 10:10 PM
|
Joined: Mar 2002
Posts: 1,687
Jim Rogers
OP
Member
|
OP
Member
Joined: Mar 2002
Posts: 1,687 |
Timber Framing Hand Tools for Sale (Updated 3/16/12-PM) Here is a list of tools currently available for sale.
These tools have been cleaned, sharpen, honed, and "some" have had handles replaced with new strike end rings.
Tools for sale
Slicks
3 5/8"--No Name----------$205--2Y 3 1/2"--Barton-------------$215--3B 2 5/8"--NoName------------$135-3i**+ (short handle) 3 1/2"--Jackson-------------$195-3K 3"------Hunter----------------$140-3L 3 3/8"--Douglas---------------$175-3M 3"------Bratty & Son----------$235-3N
Corner Chisels
1"-----Unreadable-----$90--3i 1 1/4"-----Douglas----$105--3n
Framing Chisels
1/2"-----Mortising Chisel---------$80--3A 2"-------Samson------------------------$90--6F 3/4"---Paring chisel (no ring)------------$50-7Q**+ (not restored) 1 1/2" Paring chisel (no ring)------------$75-7R**+ (not restored) 2"----- Framing Chisel-------------------$85-7T**+ (not restored) 2"----- Framing Chisel (no ring)---------$85-7V**+ (not restored) 2"------Buck-----------------------------$100-7Y 3/4"---Greenlee-------------------------$70-8A 1"-----Howell & Co.----------------------$70-8i 2"-----Butcher---------------------------$60-8R 1 1/2"-Hand forged----------------------$50-8S 2"------G.A.Wilcox------------------------$90-9A 1 7/16"-Unknown-------------------------$40-9C** 1 1/2"--Underhill--------------------------$75-9G 1 1/2"--New Haven Edge Tool------------$125-9H 2"------Merrill & Co.-----------------------$90-9J 2"------PS & W----------------------------$80-9K 1 1/2"--White-----------------------------$105-9L 1 7/16"-Buck------------------------------$80-9M 1 1/4"--Craftsman-------------------------$30-9N 2" Witherby-------------------------------$115-9P 1 1/2" Witherby---------------------------$105-9R 2" Witherby--------------------------------$90-9T 2" Underhill--------------------------------$100-9U 2" Witherby--------------------------------$100-9V 2" PS&W-----------------------------------$110-9W 2" Witherby--------------------------------$50-9X 2" G.Branch--------------------------------$85-9Y 3/4" Framing chisel-------------------------$50-9Z 1" Stealing---------------------------------$45-10A 1 1/2" Underhill-----------------------------$75-10B
We also sell new leather sheaths/tip protectors for the above chisels and slicks. If you would like a photo of a sheath, and your email program will accept pictures, I can send you one, just let me know.
Here is a list of Sheaths currently available for sale.
Sheathes Price List 8-5-11
Plain Leather #102............... $14 Plain Leather #102.5............. $14 Plain Leather #103................ $14 Plain Leather #103.5............. $18 Plain Leather #104................ $18
These are brand new.
I hope you will take advantage of this offer, these are nice leather sheaths.
All prices do not include shipping costs. Shipping to most areas is $3 for one sheath. $4.95 flat rate box for up to three sheaths. More than three sheaths will require a shipping quote.
Draw Knives
6"--Unknown-curved scoop blade-----$35-M213** 6"--Buck Brothers-curved blade-------$70-M222** 10"-Mix--------------------------------$60-2N 8"-Dunlap(folding handle)--------------$65-2O 8"-Rich-Con----------------------------$70-2P
Boring Machines
All boring machines have been cleaned, inspected, repaired if needed, and tested to insure that work properly, and have been oiled and are ready to bore holes.
Ajax-------------------------------$355-D6 Snell (with two bits-2" & 1 1/2")---$295-E6 Millers Falls------------------------$595-F6 Swan-adjustable----------------------$295-G6
Boring Machine Bits
All boring machine bits been cleaned, inspected, repaired if needed, sharpened and tested to insure they work properly, and have been oiled and are ready to bore holes.
9/16"------8G-@$25 2 1/4"-----9M-@$25 1 1/16"---10K-@$25 11/16"----10S-@$25 3"-----------13Q-A-$50 1 1/16"Ajax-15M-5-$20 15/16"------16T-i-$25 9/16"--------17J-$10 (short Jennings style 8 to 8 /12" long) 11/16"-------17K-$10 (short Jennings style 8 to 8 /12" long) 11/16"-------17L-$10 (short Jennings style 8 to 8 /12" long) 1 3/4"--------17Q-C-$35 fine thread 1 9/16"-------17R-D-$25 11/16"--------17T-$7-Greenlee single spur power drill bit 13/16"--------17U-$7-Greenlee single spur power drill bit 13/16"--------17V-$7-Greenlee single spur power drill bit 13/16"--------17W-$7-Greenlee single spur power drill bit 13/16"--------17X-$7-Greenlee single spur power drill bit 13/16"--------17Y-$7-Greenlee single spur power drill bit 7/8"-----------17Z-$7-Greenlee single spur power drill bit 7/8"-----------18A-$7-Greenlee single spur power drill bit 7/8"-----------18B-$7-Greenlee single spur power drill bit 7/8"-----------18C-$7-Greenlee single spur power drill bit 1 5/8"----------18i-A-$25 1 5/8"-----------18R-J-$30 2"-------------------19U-5-$40 2" Fine Thread-------19W-7-$40 1 1/8" ship auger---19X-8-$20 1" ship auger--------19Y-9-$20 1 3/8" ship auger---19Z-10-$20 3/4"-----------------20A**-$45 3/4"-----------------20B-$45 3/4"-----------------20C-$45 2"--------------------20H-1-$40 1 1/4"----------------20K-4-$35 1"-Ajax bit-----------20M-6-$35 1"-Ajax bit-----------20N-7-$35 15/16"---------------20P-$25 1 1/2" bit------------20T-$40 2" bit----------------20X-$40 1" bit----------------20Z-$35 1 1/4" bit------------21A-$30 1 1/2" bit------------21B-K-$40 1 1/2" bit------------21C-L-$40 1 1/2" bit------------21D-M-$40 1 5/8" bit------------21E-A-$40 15/16" bit-----------21F-B-$30 1" bit----------------21G-C-$40 1 1/2" bit------------21H-D-$40 2" bit----------------21i-E-$40 2" bit----------------21J-F-$40 2" bit----------------21K-G-$40. 1 1/2" bit fine thread-21L-A-$45 2" bit-----------------21M-B-$35 1 1/2" bit fine thread-21N-C-$45 2 1/2" bit------------21O-D-$50 1 1/2" bit------------21P-E-$45 1 1/2" bit fine thread-21R-G-$45 2" bit fine thread-----21S-H-$45 2" bit-----------------21T-i-$40 2" bit-----------------21U-1-$45 2 1/2" bit-------------21V-2-$50 1 1/2" bit-------------21W-3-$40 2" bit-----------------21X-4-$40 1 1/2" bit-------------21Y-5-$35
Misc.
Spoke shaves, other planes and other tools: Craftsman #6 plane----------$70--M75 Bit brace----------------------------$10-M129**C Bit brace----------------------------$8-M130** Bit brace----------------------------$15-M131**E Bit brace-----------------------------$7-M134**B Strop (for sharpening)--------------$10-M135(NEW) 10" Bit Brace------------------------$22-M139 Stanley #102 block plane-------------$12-M143**(as is, not restored) 13/16" Rabbet plane-------------------$15-M147** T-Handles 4 augers (wooden, 7 on hand)-$2-M187A-M ($2 each) Stanley 151 blade only---------------------$15-M197** 2 1/2" T-Handle auger---------------------$50-M198 9" Dividers---------------------------------$10-M200** Adze handle (New #1 grade Hickory)-----$18-M206 (Flame hardened) Adze handle (New #1 grade Hickory)-----$18-M208 (Flame hardened) 4 1/2" Dividers-----------------------------$8-M216** Wooden Dividers---------------------------------$20-M234** 21" Dividers--------------------------------------$35-M240** Spoke Shave 151 style-round bottom----------$20-M241** (new) Set of Audel's Mason books Vol 1-4--------------$40-M256** Block Plane-----------------------------------------$20-M260** Spoke Shave---------------------------------------$26-M261** Alpha Rafter Protractor----------------------------$100-M267** Carpenter pencil sharpener------------------------$5-M271** Stanley type spoke shave 151--------------------$30-M272** Hewing Demo movie cd---------------------------$5-M273** Shaving horse (no shipping pick up only)---------$110-M276** Broad Axe handle--------------------------------$20-M277 (9 on hand) eBook "How to build a model"--------------------$20-M278** 6" Caliper-----------------------------------------$8-M280** 6" inside caliper-----------------------------------$8-M281** 5" inside caliper-----------------------------------$8-M282** 5" Dividers----------------------------------------$8-M283** Stanley 151 Spoke shave-------------------------$40-M286 Millers Falls auger bit handle-----------------------$20-M287 VBI auger bit handle (like new)--------------------$25-M288 Auger bit handle----------------------------------$18-M289 PS&W auger bit handle----------------------------$20-M290 Bit brace set of bits-------------------------------$30-M291** (#7, 8, 8, 10, 10, 10, 14, 15, 16) Millers Falls replacement depth stop---------------$10-M292 Broad Hatchet handle-------------------------------$10-M293** Swan/Snell boring machine dept stop----------------$7.64-M294**
Bit and Brace Bits:
7/16" Shell Auger-$10-6G 5/8" Shell Auger-$10-6H 11/16" Ships Auger-$15-6i 11/16" Ships Auger-$15-5J 11/16" Ships Auger-$15-5K 11/16" Shell Auger-$15-5L 7/8" Shell Auger-long shank for boring machine-$10-16C** 1"---Shell Auger-long shank for boring machine-$10-16D** 7/8"-Shell Auger-long shank for bit brace--------$10-16E** 11/16"-Shell Auger-long shank for bit brace--------$10-16H** 3/4"-Spur Auger-long shank for bit brace-----------$35-19H** 1" Spur auger bit for brace-------------------------$4-21Z** 1" Spur auger bit for brace-------------------------$4-22A**
I hope you will take advantage of this offer, these are nice tools. If you would like a photo of a tool, and your email program will accept pictures, I can send you one, just let me know. All prices do not include shipping costs.
Jim Rogers
The id letter/number system after each tool price is my personal system to keep track of which item is which.
Whatever you do, have fun doing it!
|
|
|
Re: Timber Framing hand tools for sale list 3-16-12
[Re: Jim Rogers]
#28374
03/28/12 03:30 PM
|
Joined: Mar 2012
Posts: 1
Hardy
Member
|
Member
Joined: Mar 2012
Posts: 1 |
Jim: I have what I think is a Snell and need boring bits, 1.5" and 2". The socket accepts a .5" dia and the remaining bit length is 10.25 w/o the small lead tip. When I do get my timbers cut, which bits would I order? Thanks, Jeff
|
|
|
Re: Timber Framing hand tools for sale list 3-16-12
[Re: Hardy]
#28375
03/28/12 08:56 PM
|
Joined: Mar 2002
Posts: 1,687
Jim Rogers
OP
Member
|
OP
Member
Joined: Mar 2002
Posts: 1,687 |
Jeff: Thanks for your interest in our tools, and bits.
You can get any bits you want any time you want. Send me an email via the regular email system and I'll send you some info on buying tools. Send to jrsawmill (at) verizon (dot)net.
We have bits on hand as the list shows. I'm not sure if they are the right length or not until I measure the one(s) you pick out from our list.
Jim Rogers
Whatever you do, have fun doing it!
|
|
|
Re: Timber Framing hand tools for sale list 3-16-12
[Re: Jim Rogers]
#28376
03/29/12 12:04 AM
|
Joined: Dec 2007
Posts: 1,882
TIMBEAL
Member
|
Member
Joined: Dec 2007
Posts: 1,882 |
Hardy, note in Jim's list that there are bits with fine threads. If you are cutting hard wood or tougher species other than white pine I would suggest you have a selection of bits with different thread counts. A finer thread will remove a thiner chip and thus make it easier to turn but longer to bore the hole. And of course you cant go wrong with a machine with a variable gear selection such as the Boss Double Eagle and some have adjustable length to the crank arms, giving more power if needed.
What condition is the wooden frame on your Snell? Will it hold up to the work required? There are solutions to an old, dried out, tender, crippled working machine.
|
|
|
|
|