|
Turning the Timbers
#30247
02/06/13 02:39 AM
|
Joined: Nov 2006
Posts: 850
mo
OP
Member
|
OP
Member
Joined: Nov 2006
Posts: 850 |
I'm bout to have some 10 X 12 X 26 footers hit the floor.
Well, these are little too much for the ole put your shoulders into to it to flip. Especially when on its 12" face.
I've seen the plywood wrenches where I am leaning to making, but figured I'd ask to see what other people have come up with to turn the big sticks.
I see myself crawling around and over to lay these out.
Last edited by mo; 02/06/13 02:40 AM.
|
|
|
Re: Turning the Timbers
[Re: mo]
#30248
02/06/13 02:47 AM
|
Joined: Nov 2008
Posts: 582
Jay White Cloud
Member
|
Member
Joined: Nov 2008
Posts: 582 |
Hi Mo,
They (wooden "Beam Wrench")work really well, but often a stout 3' or 4' pipe clamp will work just as well. You can use a 2x4 and a loop of rope as also.
Regards,
Jay
Last edited by Jay White Cloud; 02/06/13 02:48 AM.
|
|
|
Re: Turning the Timbers
[Re: Jay White Cloud]
#30249
02/06/13 03:06 AM
|
Joined: Nov 2006
Posts: 850
mo
OP
Member
|
OP
Member
Joined: Nov 2006
Posts: 850 |
Hey Jay,
Thanks. Haven't thought about a loop and stick before. Seems it might crash once it meets the tipping point though. I guess I'll go with the beam wrench. Gotta make sure to get the shoulder out of the way!
By the way. Love your scribed footer. Very nice sir.
|
|
|
Re: Turning the Timbers
[Re: mo]
#30250
02/06/13 01:29 PM
|
Joined: Feb 2006
Posts: 718
Dave Shepard
Member
|
Member
Joined: Feb 2006
Posts: 718 |
I use a 6' piece of 3"x4" with an 8' sling. I put both eyes over the end of the 3x4 and wrap the extra over the top of the timber and catch it on the other end of the lever. Works great. I've used it on timbers a big as 10"x17"x47'. I will see if I can get a picture loaded later.
Last edited by Dave Shepard; 02/06/13 01:29 PM.
Member, Timber Framers Guild
|
|
|
Re: Turning the Timbers
[Re: Dave Shepard]
#30252
02/06/13 03:16 PM
|
Joined: Mar 2002
Posts: 28
Mike Shenton
Member
|
Member
Joined: Mar 2002
Posts: 28 |
I use my cant hook on the end I plan to cut off or on an outside face. I also use clamps to turn if I don't have a place to put my cant hook.
Michael Shenton
|
|
|
Re: Turning the Timbers
[Re: Mike Shenton]
#30255
02/06/13 04:53 PM
|
Joined: Nov 2008
Posts: 582
Jay White Cloud
Member
|
Member
Joined: Nov 2008
Posts: 582 |
Dave S's description was perfect...that is just about what I do when I use a "sling stick," or "sling cant," as I was taught they were called.
|
|
|
Re: Turning the Timbers
[Re: mo]
#30262
02/07/13 07:58 PM
|
Joined: Apr 2010
Posts: 9
timberjoiner
Member
|
Member
Joined: Apr 2010
Posts: 9 |
Clamps are ideal. Why? They are affordable and readily available. Plus they can be used for numerous other task in addition to rolling timbers. It's like they are paying for themselves many times over... I've used a certain clamp for this size timber. It was a bar reaching in length of four feet plus. It has a deep throat with a mechanical leveraged plunger for a more powerful clamp. Two of these clamps with two people (one one the lifting side and one one the receiving side) make for a dream rolling timber of this size. Hope this helps.
|
|
|
Re: Turning the Timbers
[Re: timberjoiner]
#30263
02/07/13 10:00 PM
|
Joined: Mar 2011
Posts: 143
Hylandwoodcraft
Member
|
Member
Joined: Mar 2011
Posts: 143 |
I have a modified set of heavy bar clamps (not pipe clamps). I welded extra long jaws on them, with a detachable handle extension. They work well for turning timbers. The main reason I made them was to be able to tweak timbers during raisings if they have twisted a bit. They are handy!
|
|
|
Re: Turning the Timbers
[Re: mo]
#30351
02/24/13 03:19 PM
|
Joined: Feb 2012
Posts: 273
D Wagstaff
Member
|
Member
Joined: Feb 2012
Posts: 273 |
Hello,
You could do it with a picaroon!
Greetings,
Don Wagstaff
|
|
|
Re: Turning the Timbers
[Re: D Wagstaff]
#30353
02/24/13 05:44 PM
|
Joined: Nov 2008
Posts: 582
Jay White Cloud
Member
|
Member
Joined: Nov 2008
Posts: 582 |
Hi Don,
I don't think, after finish work has started, you could get a picaroon to turn a 200 mm x 300 mm x 4800 mm oak beam effectively or without marring the surface.
Regards,
Jay
|
|
|
|
|
|
|