Topic Options
Rate This Topic
#30737 - 06/17/13 07:10 PM Apprenticeship Application
andrewmcfadden Offline
Member

Registered: 11/02/10
Posts: 8
Loc: GA
I was wondering if there was a link on the guild website for an apprentice application. Thanks.

Top
#30738 - 06/17/13 07:27 PM Re: Apprenticeship Application [Re: andrewmcfadden]
Roger Nair Offline
Member

Registered: 10/20/99
Posts: 449
Loc: Bakerton, WV, USA
Try this, info in the bottom paragraphs.

http://www.tfguild.org/apprenticeship

Top
#30739 - 06/17/13 08:44 PM Re: Apprenticeship Application [Re: Roger Nair]
andrewmcfadden Offline
Member

Registered: 11/02/10
Posts: 8
Loc: GA
Thanks for the response. I've looked over the /apprenticeship page pretty well and can't seem to find it.

Top
#30740 - 06/17/13 09:40 PM Re: Apprenticeship Application [Re: andrewmcfadden]
Roger Nair Offline
Member

Registered: 10/20/99
Posts: 449
Loc: Bakerton, WV, USA
At the bottom of the page on the link I posted is the topic "How do i get in?", in the first paragraph in blue is a link to a contact form. Click the link.


Edited by Roger Nair (06/17/13 09:41 PM)

Top
#30741 - 06/18/13 05:59 AM Re: Apprenticeship Application [Re: Roger Nair]
andrewmcfadden Offline
Member

Registered: 11/02/10
Posts: 8
Loc: GA
Thanks again Roger. I should have explained myself a little further. I work with Whit and Gabel Holder and we are trying to get the paperwork sent in. They weren't sure where to get one (or if there is one), so I thought I would try to find one on the website somewhere in all the apprenticeship material. I will talk to them today and see. Again, thanks for your help.

Top
#30742 - 06/18/13 10:20 AM Re: Apprenticeship Application [Re: andrewmcfadden]
Roger Nair Offline
Member

Registered: 10/20/99
Posts: 449
Loc: Bakerton, WV, USA
Call Curtis Milton

Top
#30743 - 06/18/13 07:23 PM Re: Apprenticeship Application [Re: Roger Nair]
andrewmcfadden Offline
Member

Registered: 11/02/10
Posts: 8
Loc: GA
Sounds good. Thanks

Top

Moderator:  Jim Rogers, mdfinc, Will B 
Newest Members
mike_wood, Airspoon, paulf, Willlisak, Alecson
4755 Registered Users