Topic Options
Rate This Topic
#34139 - 03/30/17 03:40 PM Timber Framing hand tools for sale list-9-13-18
Jim Rogers Online   confused

Member

Registered: 03/14/02
Posts: 1639
Loc: Georgetown, MA, USA
Timber Framing Hand Tools for Sale
(Updated 9/13/18-AM)


Here is a list of tools currently available for sale.

These tools have been cleaned, sharpen, honed, and "some" have had handles replaced with new strike end rings.

Tools for sale

Slicks

3" Sargent-------------$225-4K

Corner Chisels

Sold out

Framing Chisels

3/4"---Paring chisel -new handle & ring--$60-7Q**+ (not restored)
3/4"---Greenlee-------------------------$70-8A
3/4" Swan framing chisel----------------------$80-15M-3
1" Unreadable label----------------------------$80-15N-4
1" Winstead framer chisel---------------------$75-17E-2
1 7/8" Butcher--------------------------------$80-17H-3
1" Butcher------------------------------------$85-17Z-8
1" Greenlee-----------------------------------$75-18D-2
2" no name-----------------------------------$90-18G-2
2" PS&W firmer chisel------------------------$65-18H-1
1 15/16" unreadable--------------------------$90-18i-2

We also sell new leather sheaths/tip protectors for the above chisels and slicks.

Here is a list of Sheaths currently available for sale.

Sheathes/Tip protectors Price List 5-20-18

Plain Leather #102.5............. $18
Plain Leather #104................$22

I hope you will take advantage of this offer, these are nice leather sheaths.
If you would like a photo of a sheath, and your email program will accept pictures, I can send you one, just let me know.

Larger shots have been taken of each and they are available to be emailed to you.
All prices do not include shipping costs. Shipping to most areas is $3.75 for one sheath.
$7.15 flat rate box for up to three sheaths. More than three sheaths will require a shipping quote.

Draw Knives

8" draw knife---$88-3s**
8" Blacksmith forged---------$50-4G

Boring Machines

All boring machines have been cleaned, inspected, repaired if needed, and tested to insure that work properly, and have been oiled and are ready to bore holes.

Snell-------------$385-F10**
Miller Falls------$875-i10
Swan-w/2bits------$325-J10

Boring Machine Bits

All boring machine bits been cleaned, inspected, repaired if needed, sharpened and tested to insure they work properly, and have been oiled and are ready to bore holes.

1 9/16"-------17R-D-$25
1 5/8"----------18i-A-$25
1 5/8"-----------18R-J-$30
1 1/8" ship auger---19X-8-$20
1 5/8" bit--------------26V-4-$35
2 1/8" bit--------------26Y-3-$40
1 3/4" bit--------------27D-8-$30
2 1/4" bit----------------29S-22-$35
1 1/4" bit-----------------31R-11-$35
1 1/4" bit-----------------32F-1-$25
1 1/4" Bit-----------------32Z-3-$30
2 1/8" Bit-----------------33D-9-$30
1 7/16" Bit-----------------35H-6-$30
2 1/2" Bit-----------------35K-1-$50
1 1/4" Bit-----------------36D-2-$30
5/8" Bit (Snell)---------37S-4-$30
1 1/4" Bit---------------38S-2-$30
13/16" Bit--------------39G-10**-$45
1 1/2" Bit-Irwin--------39R-9-$50
1 1/2" Bit-Irwin--------39S-10-$50
2" Bit fine thread-------39V-1-$55
2" Bit--------------------40C-7-$40
1 1/2" Bit----------------40G-11-$40
2" Bit---------------------40i-2-$50
1 3/4" Bit-----------------40J-3-$35
1 1/2" Bit-Irwin----------40M-1-$50
1 1/2" Bit-Irwin----------40N-2-$50
1 1/2" Bit-Irwin----------40P-4-$50
2" Bit-fine thread---------40Q-5-$55
1 1/2" Bit-----------------40R-6-$40
1" Bit-long 14"------------40T-8-$50 (for Miller Falls)
13/16" Bit-long-14"-------40U-9-$40 (for Miller Falls)
1" Bit--------------------40V-1-$30

Misc.

Spoke shaves, other planes and other tools:
Strops------------------------$10-M135
Borneman layout template-$145-M160(on hand)
Miller Falls depth stop-------------------$10-M292
Broad Hatchet handle----------------------$10-M293**
Swan/Snell boring machine dept stop-------$8-M294**
Yellowstone stropping compound------------$12-M301
TimberFramers Layout tape measure---------$20-M354**
Spoke shave 151 style---------------------$28-M462**
Tenon checker tool------------------------$75-M474**
Test pin----------------------------------sold out
151 Spoke shave blade only----------------$28-M509**
Universal auger handle--------------------$15-M518
Small spoke shave (151 style)-------------$30-M520
Craftsman block plane---------------------$30-M527**
Block plane-------------------------------$27-M533**
Stanley block plane-----------------------$38-M535**
51 spoke shave----------------------------$54-M543**
Audel's book set 1951----------------------$46-M553**
Audel's book set 1951----------------------$50-M555**
Peg hole mirror---------------------------$20-M556**
Audel's book set 1951------------------------$40-M558**
Spoke shave---------------------------------$22-M560**
Stanley spoke shave 151 style---------------$40-M566**
Spoke shave-----------------------------------$36-M570**
Bit brace---------------------------------------$25-M575**
Bit brace---------------------------------------$22-M576**
Spoke shave-----------------------------------$34-M578**
Ajax depth stop--------------------------------$30-M579**
Audel's book set 1923---------------------------$68-M582**
Stanley 151 spoke shave-------------------------$40-M585
Stanley 151 spoke shave-------------------------$40-M586
Stanley 151 spoke shave-------------------------$40-M587
Stanley 151 spoke shave-------------------------$40-M588

Bit and Brace Bits:

7/16 Shell Auger-$10-6G
5/8 Shell Auger-$10-6H
11/16 Ships Auger-$15-6i
11/16 Ships Auger-$15-5J
11/16 Ships Auger-$15-5K
11/16 Shell Auger-$15-5L
11/16"-Shell Auger-long shank for bit brace--------$4-16H**
1 1/16" Single spur auger bit for brace---------------$10-23L**
5/8" Spur auger bit for brace-NEW--------------------$8-26R**
1" Spur auger bit for brace------------------------$35-32C-1**
15/16" Spur auger bit brace bit---------------------$8-34E-3**
11/16" Spur auger bit brace bit---------------------$8-34F-4**
3/4" Spur auger bit brace bit---------------------$24-35L-10**
13/16" Spur auger bit brace bit----------------------$8-35T**^
13/16" Spur auger bit brace bit--------------------$22-37B-1**
3/4" Spur auger bit brace bit----------------------$15-37L-1**
3/4" Spur auger bit brace bit----------------------$15-37M-2**
3/4" Spur auger bit brace bit----------------------$14-37O-4**
15/16" Spur auger bit brace bit--------------------$15-37V-1**
13/16" Spur auger bit brace bit--------------------$20-37W-2**
3/4" Spur auger bit brace bit----------------------$22-37Y-4**
5/8" Spur auger bit brace bit----------------------$18-37Z-5**
3/4" long shank Spur auger bit brace bit-----------$40-38A-6**
3/4" Spur auger bit brace bit----------------------$20-38B-7**
1" Spur auger bit brace bit------------------------$23-38C-8**
7/8" Spur auger bit brace bit----------------------$11-38N-1**
15/16" Spur auger bit brace bit--------------------$11-38O-2**

I hope you will take advantage of this offer, these are nice tools.
If you would like a photo of a tool, and your email program will accept pictures, I can send you one, just let me know. Larger shots have been taken of each tool and they are available to be emailed to you.
All prices do not include shipping costs.

Jim Rogers
Vintage Tools NE

The id letter/number system after each tool price is my personal system to keep track of which item is which.


Edited by Jim Rogers (09/13/18 08:42 AM)
Edit Reason: update list
_________________________
Whatever you do, have fun doing it!

Top
#34201 - 05/25/17 06:40 PM Re: Timber Framing hand tools for sale list-5-17-17 [Re: Jim Rogers]
ReverendErn Offline
Member

Registered: 05/25/17
Posts: 1
I'm looking for a 2" dia auger bit that I can put in my 1/2 inch drill. Have anything?

Top
#34202 - 05/26/17 08:43 AM Re: Timber Framing hand tools for sale list-5-17-17 [Re: Jim Rogers]
Jim Rogers Online   confused

Member

Registered: 03/14/02
Posts: 1639
Loc: Georgetown, MA, USA
Our 2" auger bits are for boring machines only. The will not work in power drills. Sorry.

Jim Rogers
_________________________
Whatever you do, have fun doing it!

Top
#34203 - 05/26/17 09:14 AM Re: Timber Framing hand tools for sale list-5-17-17 [Re: Jim Rogers]
TIMBEAL Offline
Member

Registered: 12/10/07
Posts: 1882
Loc: Maine
Jim, what is it specifically that knocks the boring machine bits out of use in an electric drill? I have used boring machine bits in an electric drill. The biggest issue I have seen is the chance of the bit slipping in the chuck, but not a big issue.

Top
#34204 - 05/26/17 10:25 AM Re: Timber Framing hand tools for sale list-5-17-17 [Re: Jim Rogers]
Dave Shepard Online   content
Member

Registered: 02/19/06
Posts: 717
Loc: Alford, MA
I've run them in my HoleHawg, and 18v cordless. I've wondered what would happen if the bit jambed in the Hawg. Hopefully just slip the chuck and not mangle the bit. The new 18v SuperHawg has a slip clutch in low gear...
_________________________
Member, Timber Framers Guild

Top
#34205 - 05/26/17 03:18 PM Re: Timber Framing hand tools for sale list-5-17-17 [Re: TIMBEAL]
Jim Rogers Online   confused

Member

Registered: 03/14/02
Posts: 1639
Loc: Georgetown, MA, USA
Originally Posted By: TIMBEAL
Jim, what is it specifically that knocks the boring machine bits out of use in an electric drill? I have used boring machine bits in an electric drill. The biggest issue I have seen is the chance of the bit slipping in the chuck, but not a big issue.

Due to the fact that these bits are designed to turn at a very slow rpm we don't recommend using them in a power drill. The torque when the grab is huge and can twist the drill right out of your hands.
I will sell any bit to anyone but beware that this can happen and it won't be pretty when it does. Especially with a 2" bit.
Jim Rogers
_________________________
Whatever you do, have fun doing it!

Top
#34206 - 05/26/17 09:25 PM Re: Timber Framing hand tools for sale list-5-17-17 [Re: Jim Rogers]
TIMBEAL Offline
Member

Registered: 12/10/07
Posts: 1882
Loc: Maine
Right, I agree. To clarify my use is with a drill in a jig.
This is a mock up test machine and only 1.5" bit. I have used a 2" in the newer version 2.o
https://www.youtube.com/watch?v=9a6Wanrg6U4&t=2s

Top
#34496 - 07/03/18 11:37 AM Re: Timber Framing hand tools for sale list-7-3-18 [Re: Jim Rogers]
Jim Rogers Online   confused

Member

Registered: 03/14/02
Posts: 1639
Loc: Georgetown, MA, USA
The for sale list has just been updated.
_________________________
Whatever you do, have fun doing it!

Top

Moderator:  Jim Rogers, mdfinc 
Newest Members
Tronmega, imago, Pogodno, Mitersawjudge, snekkerbuse
4866 Registered Users