Sperber base for circular saw - Timber Frame Forums

Register Log In Timber Framers Guild Forums Timberframe Design Sperber base for circular saw

Print Thread

Rate Thread

Sperber base for circular saw #5343 01/28/05 11:58 PM
Joined: Jan 2005 Posts: 8 Richmond, VT T Todd Farr OP Member
OP Todd Farr Member T Joined: Jan 2005 Posts: 8 Richmond, VT	I have used a sperber built base on a circular saw in the past, and would like to buy/have fabricated a couple of bases for 16" makita saws. If any one knows how to help it would be much appreciated. Thanks Todd Farr

Re: Sperber base for circular saw #5344 01/29/05 02:07 PM
Joined: Mar 2002 Posts: 1,687 Sneads Ferry, NC, USA J Jim Rogers Member
Jim Rogers Member J Joined: Mar 2002 Posts: 1,687 Sneads Ferry, NC, USA	A better place to post such a question is in the "TOOL FORUM"........ Whatever you do, have fun doing it!

Re: Sperber base for circular saw #5345 01/29/05 11:58 PM
Joined: Apr 2002 Posts: 86 Lexington, VA B Bob Smith Member
Bob Smith Member B Joined: Apr 2002 Posts: 86 Lexington, VA	As best I know, Sperber bases are no longer available. However, Phil Bjork at Great Northern Timberworks makes a fantastic base for the older 16" Makita. You can find him in the directory. In my opinion, this base is superior to the Sperber in that you don't lose depth of cut and the available bevel angle is about 20 degrees. Good Luck, Bob

Moderated by Jim Rogers, mdfinc, Paul Freeman

Hop To

Newest Members

Bradyhas1, cpgoody, James_Fargeaux, HFT, Wrongthinker
5137 Registered Users

show/hide columns on this page

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)

PHP: 5.4.45 Page Time: 0.061s Queries: 14 (0.044s) Memory: 3.1180 MB (Peak: 3.5814 MB) Data Comp: Off Server Time: 2024-05-04 03:11:20 UTC
Valid HTML 5 and Valid CSS