Mill Rule v Square Rule

Print Thread

Rate Thread

Re: Mill Rule v Square Rule [Re: Ken Hume] #11257 04/26/07 08:40 PM
Joined: Jan 2007 Posts: 53 SW France G Griffon Member
Griffon Member G Joined: Jan 2007 Posts: 53 SW France	The timber I've bought so far (for braces) has been correct +/- 2mm (between 1/16" and 1/8"). If I can be assured of the same tolerances for the big stuff, is that good enough to use mill rule? Time is an ocean but it stops at the shore Bob Dylan

Entire Thread
Subject	Posted By	Posted
Mill Rule v Square Rule	Ken Hume	04/26/07 06:38 AM
Re: Mill Rule v Square Rule	Emmett C Greenleaf	04/26/07 08:06 PM
Re: Mill Rule v Square Rule	Griffon	04/26/07 08:40 PM
Re: Mill Rule v Square Rule	Gabel	04/26/07 09:21 PM
Re: Mill Rule v Square Rule	mo	04/26/07 09:59 PM
Re: Mill Rule v Square Rule	Griffon	04/27/07 09:28 PM
Re: Mill Rule v Square Rule	mo	04/28/07 05:46 AM
Re: Mill Rule v Square Rule	Housewright	04/30/07 02:40 AM
Re: Mill Rule v Square Rule	Gabel	04/30/07 10:10 PM
Re: Mill Rule v Square Rule	Dan F	05/02/07 10:51 AM
Re: Mill Rule v Square Rule	E.H.Carpentry	05/02/07 11:03 AM
Re: Mill Rule v Square Rule	Jim Rogers	05/02/07 01:06 PM
Re: Mill Rule v Square Rule	Mark Davidson	05/03/07 11:51 AM
Re: Mill Rule v Square Rule	Dave Shepard	05/03/07 04:18 PM
Re: Mill Rule v Square Rule	brad_bb	06/07/07 05:07 PM
Re: Mill Rule v Square Rule	toivo	06/16/07 02:47 AM
Re: Mill Rule v Square Rule	northern hewer	09/07/07 01:27 AM
Re: Mill Rule v Square Rule	Ken Hume	04/26/07 09:56 PM
Re: Mill Rule v Square Rule	dave	10/18/07 04:34 AM
Re: Mill Rule v Square Rule	Ken Hume	10/20/07 07:49 AM
Re: Mill Rule v Square Rule	northern hewer	10/26/07 01:14 AM
Re: Mill Rule v Square Rule	Timber Goddess	10/26/07 02:06 AM
Re: Mill Rule v Square Rule	dave	10/28/07 03:58 PM

Moderated by Jim Rogers, mdfinc

Hop To

Newest Members

Bradyhas1, cpgoody, James_Fargeaux, HFT, Wrongthinker
5137 Registered Users

show/hide columns on this page

PHP: 5.4.45 Page Time: 0.081s Queries: 16 (0.056s) Memory: 3.2240 MB (Peak: 3.3995 MB) Data Comp: Off Server Time: 2024-05-16 17:51:08 UTC
Valid HTML 5 and Valid CSS