I built the 12x16ft shed described in the sobon book. I did it all with hand tools,using a chisel and slick to make the tenons. I used a handsaw for the shoulder line. If I do a larger project, I would like to gain speed using power tools. I assume to make the tenon, a skilsaw is used. The end is squared and the saw is placed on the endgrain and two rip cuts are made with the saw. Is this correct? What size saw is needed ( 16"?)and are there sources for used equipment. Same question for the mortise. I used boring tool and 1.5 or 2." auger bits. Can a chain mortiser be acquired used or is it likely to be burned out from use? Any leads appreciated.
Thanks,
Bob