Old Sash-Saw Mill

Print Thread

Rate Thread

Re: Old Sash-Saw Mill [Re: OurBarns1] #16707 09/02/08 01:20 AM
Joined: Dec 2007 Posts: 1,882 Maine T TIMBEAL Member
TIMBEAL Member T Joined: Dec 2007 Posts: 1,882 Maine	I too have seen full length common purlins, 36'+ and most likely sawn on a up and down saw. Tim

Entire Thread
Subject	Posted By	Posted
Old Sash-Saw Mill	OurBarns1	08/06/08 05:38 PM
Re: Old Sash-Saw Mill	Jim Rogers	08/07/08 11:10 AM
Re: Old Sash-Saw Mill	OurBarns1	08/07/08 08:27 PM
Re: Old Sash-Saw Mill	OurBarns1	08/14/08 12:35 AM
Re: Old Sash-Saw Mill	Housewright	08/14/08 01:03 AM
Re: Old Sash-Saw Mill	Dave Shepard	08/14/08 01:06 AM
Re: Old Sash-Saw Mill	collarandhames	08/14/08 01:37 AM
Re: Old Sash-Saw Mill	daiku	08/14/08 01:09 PM
Re: Old Sash-Saw Mill	OurBarns1	08/15/08 02:53 AM
Re: Old Sash-Saw Mill	TIMBEAL	08/15/08 10:43 AM
Re: Old Sash-Saw Mill	Jim Rogers	08/15/08 01:29 PM
Re: Old Sash-Saw Mill	Dave Shepard	08/16/08 01:48 AM
Re: Old Sash-Saw Mill	Will Truax	08/16/08 11:52 AM
Re: Old Sash-Saw Mill	OurBarns1	08/16/08 10:11 PM
Re: Old Sash-Saw Mill	northern hewer	08/20/08 01:25 AM
Re: Old Sash-Saw Mill	OurBarns1	08/20/08 08:37 PM
Re: Old Sash-Saw Mill	northern hewer	08/21/08 01:39 AM
Re: Old Sash-Saw Mill	OurBarns1	08/21/08 08:37 PM
Re: Old Sash-Saw Mill	Bob Spoerl	08/27/08 01:58 AM
Re: Old Sash-Saw Mill	TIMBEAL	08/27/08 11:45 AM
Re: Old Sash-Saw Mill	OurBarns1	08/27/08 09:13 PM
Re: Old Sash-Saw Mill	Bob Spoerl	08/29/08 01:12 AM
Re: Old Sash-Saw Mill	Housewright	08/30/08 10:00 PM
Re: Old Sash-Saw Mill	Ken Hume	08/31/08 09:26 AM
Re: Old Sash-Saw Mill	Roger Nair	08/31/08 09:22 PM
Re: Old Sash-Saw Mill	northern hewer	09/01/08 01:05 AM
Re: Old Sash-Saw Mill	Housewright	09/01/08 02:13 PM
Re: Old Sash-Saw Mill	collarandhames	09/02/08 01:43 AM
Re: Old Sash-Saw Mill	OurBarns1	09/02/08 08:38 PM
Re: Old Sash-Saw Mill	Housewright	09/03/08 01:31 AM
Re: Old Sash-Saw Mill	OurBarns1	09/01/08 06:20 PM
Re: Old Sash-Saw Mill	TIMBEAL	09/02/08 01:20 AM
Re: Old Sash-Saw Mill	OurBarns1	09/03/08 08:39 PM
Re: Old Sash-Saw Mill	Housewright	09/04/08 01:09 AM
Re: Old Sash-Saw Mill	northern hewer	09/05/08 01:50 AM
Re: Old Sash-Saw Mill	Ken Hume	09/05/08 06:38 AM
Re: Old Sash-Saw Mill	TIMBEAL	09/05/08 10:58 AM
Re: Old Sash-Saw Mill	Gabel	09/05/08 12:18 PM
Re: Old Sash-Saw Mill	northern hewer	09/06/08 12:32 AM
Re: Old Sash-Saw Mill	TIMBEAL	09/06/08 01:27 AM
Re: Old Sash-Saw Mill	northern hewer	09/07/08 11:49 PM
Re: Old Sash-Saw Mill	TIMBEAL	09/08/08 01:02 AM
Re: Old Sash-Saw Mill	Housewright	09/14/08 11:09 AM
Re: Old Sash-Saw Mill	northern hewer	09/15/08 01:17 AM
Re: Old Sash-Saw Mill	TIMBEAL	09/15/08 10:19 AM
Re: Old Sash-Saw Mill	TIMBEAL	09/15/08 11:11 AM
Re: Old Sash-Saw Mill	northern hewer	09/16/08 01:09 AM
Re: Old Sash-Saw Mill	northern hewer	09/16/08 01:17 AM
Re: Old Sash-Saw Mill	northern hewer	09/18/08 01:06 AM
Re: Old Sash-Saw Mill	TIMBEAL	09/18/08 10:49 AM
Re: Old Sash-Saw Mill	northern hewer	09/19/08 01:32 AM
Re: Old Sash-Saw Mill	OurBarns1	09/21/08 09:07 PM
Re: Old Sash-Saw Mill	TIMBEAL	09/22/08 01:04 AM
Re: Old Sash-Saw Mill	OurBarns1	09/22/08 08:22 PM
Re: Old Sash-Saw Mill	northern hewer	09/23/08 12:51 AM
Re: Old Sash-Saw Mill	TIMBEAL	09/23/08 01:11 AM
Re: Old Sash-Saw Mill	OurBarns1	09/23/08 03:07 AM
Re: Old Sash-Saw Mill	northern hewer	09/24/08 01:02 AM
Re: Old Sash-Saw Mill	TIMBEAL	09/24/08 01:29 AM
Re: Old Sash-Saw Mill	Housewright	09/30/08 12:53 AM
Re: Old Sash-Saw Mill	OurBarns1	09/30/08 08:59 PM
Re: Old Sash-Saw Mill	TIMBEAL	09/30/08 11:18 PM
Re: Old Sash-Saw Mill	TIMBEAL	10/01/08 10:27 PM
Re: Old Sash-Saw Mill	OurBarns1	01/27/09 01:49 AM
Re: Old Sash-Saw Mill	Housewright	02/22/10 05:55 PM
Re: Old Sash-Saw Mill	TIMBEAL	02/22/10 10:58 PM
Re: Old Sash-Saw Mill	Housewright	02/23/10 07:50 PM
Re: Old Sash-Saw Mill	OurBarns1	08/27/08 09:24 PM
Re: Old Sash-Saw Mill	northern hewer	08/28/08 02:01 AM
Re: Old Sash-Saw Mill	OurBarns1	08/29/08 01:05 AM
Re: Old Sash-Saw Mill	Ledyardsawmill	11/03/10 06:16 PM
Re: Old Sash-Saw Mill	Ward	12/10/18 05:48 PM
Re: Old Sash-Saw Mill	northern hewer	12/13/18 02:26 AM
Re: Old Sash-Saw Mill	Housewright	03/08/11 07:00 PM
Re: Old Sash-Saw Mill	Jim Rogers	03/08/11 07:27 PM

Moderated by Jim Rogers, mdfinc

Hop To

Newest Members

Bradyhas1, cpgoody, James_Fargeaux, HFT, Wrongthinker
5137 Registered Users

show/hide columns on this page

PHP: 5.4.45 Page Time: 0.097s Queries: 16 (0.063s) Memory: 3.4528 MB (Peak: 3.7462 MB) Data Comp: Off Server Time: 2024-05-10 10:58:29 UTC
Valid HTML 5 and Valid CSS