We are in the process of doing some repairs on our 1853 bank barn. Over the years the left side of the rear basement wall has been bulging out and forward. A month or so ago it let loose and collapsed. The floor beams were not fastened to the rear sill and inturn moved foward with the wall. The front sill was also very rotten and not really holding much anymore. We have a replacement cut but need to get the floor beams pulled back so that the new one will go into place. There are about 6 floor beams that are forward. The farthest one is 3.75 inches forward. Does any one have any ideas or experience with pulling them back into place?
Any help would be appreciated
Thanks

Chris Becker